We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Alternative Rope Materials in Towed Fishing Gear to Reduce Plastic Waste, A Comparative Study of Mechanical Properties and Tolerance Against Wear and Tear
Summary
Researchers compared the wear tolerance of 14 different rope materials in demersal fisheries, including conventional synthetic polymers and biodegradable alternatives, to identify lower-plastic options that can reduce fishing gear-derived plastic waste.
Abstract This paper presents a comparative study assessing the wear tolerance of rope materials in demersal fisheries, specifically seine ropes and dolly ropes. Fourteen different rope materials were assessed in this study, including conventional and alternative commercially available synthetic polymers, and biodegradable materials including natural fibre ropes and custom-made polyester monofilaments. The sample materials were subjected to controlled wear from a rotating abrasive drum. Tensile testing was performed to determine and compare mechanical properties of the samples before and after exposure to wear. A wear tolerance coefficient has been suggested, i.e. a comparative unit between the different rope material samples and a standard blended polyester/polyethylene rope material as reference. The tested nylon ropes showed the lowest reduction in breaking strength post wear and thus the highest wear tolerance of all tested materials. Conventional and biodegradable polyester ropes and monofilaments also performed well compared to the standard reference rope. The performed tests did not only consider the effect of different raw materials, but the combined effect of material and structural properties. A rope’s tolerance to wear may be affected not only by the mechanical properties of the raw material, but also fibre thickness and cross section, and rope thickness, structure and lay of rope. This study demonstrated the potential of using biodegradable polymers with higher tolerance to wear than conventional non-degradable plastic materials as a circular solution to reduce microplastic pollution caused by demersal fisheries worldwide. Application of alternative commercially available ropes and hard-lay rope structures may increase the tolerance to wear and by that reduce plastic waste.
Sign in to start a discussion.
More Papers Like This
Searching for SMART(er) solutions: A laboratory-assessment of microplastic release from aquaculture nets and ropes
Researchers tested aquaculture and fishing gear under simulated in-water abrasion to measure microplastic release rates under realistic operational conditions. The study found that net and rope materials shed substantial quantities of microplastics through routine mechanical wear.
Biodegradable fishing gears: A potential solution to ghost fishing and marine plastic pollution
Researchers evaluated biodegradable materials as alternatives to conventional nylon fishing gear to reduce ghost fishing and marine plastic pollution. They found that biodegradable nets caught fish at comparable rates but broke down much faster in ocean conditions, significantly reducing their long-term environmental impact. The study suggests that switching to biodegradable fishing gear could meaningfully reduce marine litter and the ongoing harm caused by lost or abandoned nets.
Weathering effects on microplastic production in fishing rope hauler operations: mechanical abrasion
Researchers quantified microplastic production from fishing rope surfaces during hauler operations by simulating the fishing process at varying weights and frequencies, using FTIR microscopy to characterize the size distribution and morphology of particles abraded from rope surfaces.
Potential microplastic release from the maritime industry: Abrasion of rope
Researchers quantified microplastic production from maritime rope use, finding that older, more worn ropes shed significantly more microplastic fibers during hauling, identifying the maritime industry as an underestimated source of ocean plastic pollution.
Microplastic emissions from fishing ropes: Quantification, characteristics, and implications for marine pollution
Researchers quantified microplastics generated from the mechanical abrasion of polypropylene-based fishing ropes and found that over 92% of released particles were non-fiber fragments rather than fibers. Each additional kilogram of hauling weight produced roughly 1.4 extra microplastic particles per meter of rope. Global estimates suggest that fishing rope abrasion alone releases approximately 768 trillion microplastic particles annually, highlighting fishing gear as a substantial and often overlooked source of marine microplastic pollution.