0
Article Tier 2 Remediation Sign in to save

Performance of filters applied for removal of microplastics from water – testing methodology

Desalination and Water Treatment 2023 2 citations

AI summary Read the abstract

Researchers tested deep-bed polypropylene filters and pleated cellulose filters for their ability to remove microplastics from water in a controlled laboratory setting. The study provides useful data for designing water filtration systems that can capture plastic particles before they reach consumers.

Polymers

The separation of microplastics from water using the filtration process was studied in this work. The deep-bed filter media were made of polypropylene using the melt-blown technique. The separation performance of these filters was compared to the pleated cellulose elements (surface filtration) for the prepared suspension of fragmented polystyrene particles. No pretreatment nor additives to enhance the separation process were applied upstream the filtration unit. With the increased filter efficiency (rating of depth filters ranging from 20 to 5 ), the cut-off dimeter of removed microplastic also decreased. The experiments confirmed that deep bed filtration is capable to remove efficiently very fine microplastic particles (as small as 1 ), while maintaining relatively low pressure drop. The capacity of the deep bed filter will guarantee relatively long operation time for suspensions having a low concentration of MPs, however in real process this will probably be predominantly affected by the simultaneous deposition of other solid contaminants present in the water.

More Papers Like This

Article Tier 2

Performance of Rapid Sand Filter Dual Media for Microplastic Removal in the Water: The Effect of Microplastic Size and Effective Size of Filter Media

AI summary Read the abstract

This study tested how well rapid sand filters with dual media can remove microplastics from drinking water, examining the effects of different microplastic sizes and filter media configurations. Researchers found that filter performance varied depending on the size of the plastic particles and the effective size of the filter media, providing practical insights for improving drinking water treatment systems.

Article Tier 2

Filtering microplastics from water

AI summary Read the abstract

This paper reviews technologies and approaches for filtering microplastics out of drinking water and wastewater, evaluating the effectiveness of various filtration methods. As microplastics are now detected in tap water worldwide, improving filtration systems is a critical public health priority.

Article Tier 2

Evaluation of membranes performance for microplastic removal in a simple and low-cost filtration system

AI summary Read the abstract

Researchers tested three types of filter membranes (polycarbonate, cellulose acetate, and PTFE) for removing microplastics from water in a simple low-cost household system, finding all achieved over 94% removal by mass but that some plastic particles broke into smaller pieces during filtration. Cellulose acetate membranes performed best for long-term home use, offering a practical approach for reducing microplastic exposure from tap water.

Article Tier 2

Comparative Removal Efficiency of Polypropylene Microplastics from Aqueous Solutions by Filtration, Centrifugation, and Flocculation

AI summary Read the abstract

Researchers compared three methods (filtration, centrifugation, and flocculation) for removing polypropylene microplastics from laboratory water samples, evaluating removal efficiency and practicality for use as a foundation for standardized environmental water treatment protocols.

Article Tier 2

Removal of Polypropylene Particle Contaminants Using Membrane Technology to Mitigate Microplastics Pollution in the Environment

AI summary Read the abstract

Researchers tested the ability of different membrane types to remove polypropylene microplastic particles from water, evaluating separation efficiency under varying conditions. Membranes achieved high removal rates for particles above a threshold size, with performance depending on membrane pore size, material, and operating pressure.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper