0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Detection Methods Environmental Sources Nanoplastics Policy & Risk Remediation Sign in to save

Solar-Induced Photocatalytic Degradation of Reactive Red and Turquoise Dyes Using a Titanium Oxide/Xanthan Gum Composite

Sustainability 2023 21 citations ? Citation count from OpenAlex, updated daily. May differ slightly from the publisher's own count. Score: 45 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
Abeer I. Alwared, Noor A. Mohammed, Tariq J. Al‐Musawi, Ahmed A. Mohammed

Summary

Researchers evaluated TiO2 immobilized in xanthan gum as a solar photocatalyst for degrading reactive textile dyes, finding effective degradation of both reactive red and turquoise dyes under simulated sunlight, with performance varying by pH, dye concentration, and catalyst loading.

The present study explores the solar-induced photocatalytic degradation of reactive red (RR) and reactive turquoise (RT) dyes in a single system using TiO2 immobilized in xanthan gum (TiO2/XG), synthesized using the sol–gel dip-coating technique for direct precipitation. SEM-EDX, XRD, FTIR, and UV–Vis were used to assess the characteristics of the resulting catalyst. Moreover, the effects of different operating parameters, specifically pH, dye concentration, TiO2/XG concentration, H2O2 concentration, and contact time, were also investigated in a batch photocatalytic reactor. The immobilized TiO2/XG catalyst showed a slight adsorption degradation efficiency and then improved the RR and RT dye degradation activity (92.5 and 90.8% in 120 min) under solar light with a remarkable Langmuir–Hinshelwood pseudo-first-order degradation rate of 0.0183 and 0.0151 min−1, respectively, under optimum conditions of pH 5, dye concentration of 25 mg/L, TiO2/XG concentration of 25 mg/L, H2O2 concentration of 400 mg/L, and reaction time of 120 min. The improved photocatalytic ability was ascribed to the impact of TiO2/XG nanoparticles with a high surface area, and lower band gap energy. Solar light energy has significant potential for addressing energy deficit and water pollution concerns.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Photocatalytic Degradation Using TiO2 P25: A Comparative Study for Different Textile Dyes

This study compared the photocatalytic degradation efficiency of TiO2 P25 across different textile dyes, evaluating this metallic oxide catalyst as a sustainable alternative treatment for dye-contaminated industrial effluents. Results showed variable degradation rates depending on dye structure, demonstrating that TiO2-based photocatalysis is promising but requires optimization for specific contaminants.

Article Tier 2

Photocatalytic Degradation of Textile Dyeing Wastewater Using Titanium Dioxide on a Fixed Substrate: Optimization of Process Parameters and Continuous Reactor Tests

Researchers optimized TiO2-coated glass bead photocatalysts for degrading textile dyeing wastewater under UV irradiation, using central composite design to identify optimal conditions including TiO2 dose, initial dye concentration, and pH. The fixed-substrate photocatalytic system offers practical advantages over slurry reactors for continuous wastewater treatment.

Article Tier 2

Methyl Orange Photo-Degradation by TiO2 in a Pilot Unit under Different Chemical, Physical, and Hydraulic Conditions

Researchers tested titanium dioxide as a photocatalyst for breaking down a textile dye under UV light, studying the effects of various chemical and physical conditions on degradation rates. Similar advanced oxidation technologies are being explored for degrading microplastic particles and associated chemical pollutants in water treatment.

Article Tier 2

Rubber/BiOCl: Yb,Er composite for the enhanced degradation of methylene blue and Rhodamine B dyes under solar irradiation

Researchers created a composite material by combining a photocatalyst with recycled rubber from bicycle tires that can break down textile dyes under sunlight. The composite completely degraded methylene blue and rhodamine B dyes through solar-powered photocatalytic reactions. This approach demonstrates a practical way to repurpose rubber waste while simultaneously addressing water pollution from industrial dye contamination.

Article Tier 2

Synthesis and Characterization of Hydroxyapatite/Titania Composite and its Application on Photocatalytic Degradation of Remazol Red B Textile Dye under UV Irradiation

Researchers synthesized hydroxyapatite/titania (HA/TiO2) composites using calcium from sea mussel shells and evaluated their photocatalytic degradation of Remazol Red RB textile dye under UV irradiation. The 1:1 HA/TiO2 composite achieved 94.22% dye removal within 2 hours, outperforming HA adsorption alone at 92.23% removal.

Share this paper