We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Methyl Orange Photo-Degradation by TiO2 in a Pilot Unit under Different Chemical, Physical, and Hydraulic Conditions
Summary
Researchers tested titanium dioxide as a photocatalyst for breaking down a textile dye under UV light, studying the effects of various chemical and physical conditions on degradation rates. Similar advanced oxidation technologies are being explored for degrading microplastic particles and associated chemical pollutants in water treatment.
The photo-catalytic degradation of a textile azo-dye as Methyl Orange was studied in an innovative unit constituted by a channel over which a layer of titanium dioxide (TiO2) catalyst in anatase form was deposited and activated by UVB irradiation. The degradation kinetics were followed after variation of the chemical, physical, and hydraulic/hydrodynamic parameters of the system. For this purpose, the influence of the TiO2 dosage (g/cm3), dye concentration (mg/L), pH of the solution, flow-rate (L/s), hydraulic load (cm), and irradiation power (W) were evaluated on the degradation rates. It was observed that the maximum dosage of TiO2 was 0.79 g/cm3 while for higher dosage a reduction of homogeneity of the cement conglomerate occurred. The Langmuir–Hinshelwood (LH) kinetic model was followed up to a dye concentration around 1 mg/L. It was observed that with the increase of the flow rate, an increase of the degradation kinetics was obtained, while the further increase of the flow-rate associated with the modification of the hydraulic load determined a decrease of the kinetic rates. The results also evidenced an increase of the kinetic rates with the increase of the UVB intensity. A final comparison with other dyes such as Methyl Red and Methylene Blue was carried out in consideration of the pH of the solution, which sensibly affected the removal efficiencies.
Sign in to start a discussion.
More Papers Like This
Adsorption and Photocatalytic Mineralization of Bromophenol Blue Dye with TiO2 Modified with Clinoptilolite/Activated Carbon
Researchers studied the removal of a synthetic dye from wastewater using a titanium dioxide/activated carbon photocatalyst under UV light. Advanced photocatalytic water treatment technologies have potential application in degrading microplastics and associated chemical contaminants in wastewater streams.
Unravelling the photocatalytic degradation of polyethylene microplastics with TiO2 under UV light: Evidence from kinetic studies
Researchers demonstrated that a titanium dioxide photocatalyst under UV light can break down polyethylene microplastics, achieving 34% mass loss in 8 hours and up to 54% over five treatment cycles. The process physically shrank the particles and chemically transformed them into simpler compounds like short-chain acids and carbon dioxide. While not yet ready for large-scale use, this technology could eventually help degrade microplastics in water treatment systems.
Photocatalytic Degradation Using TiO2 P25: A Comparative Study for Different Textile Dyes
This study compared the photocatalytic degradation efficiency of TiO2 P25 across different textile dyes, evaluating this metallic oxide catalyst as a sustainable alternative treatment for dye-contaminated industrial effluents. Results showed variable degradation rates depending on dye structure, demonstrating that TiO2-based photocatalysis is promising but requires optimization for specific contaminants.
TiO₂-based photocatalytic degradation of microplastics in water: Current status, challenges and future perspectives
This review examines how titanium dioxide-based materials can break down microplastics in water using light energy, generating reactive molecules that dismantle plastic polymer chains. While promising, the technology still faces challenges with efficiency and potential harmful byproducts, and more research is needed before it can be used at scale to clean microplastics from real-world water supplies.
Photocatalytic Degradation of Textile Dyeing Wastewater Using Titanium Dioxide on a Fixed Substrate: Optimization of Process Parameters and Continuous Reactor Tests
Researchers optimized TiO2-coated glass bead photocatalysts for degrading textile dyeing wastewater under UV irradiation, using central composite design to identify optimal conditions including TiO2 dose, initial dye concentration, and pH. The fixed-substrate photocatalytic system offers practical advantages over slurry reactors for continuous wastewater treatment.