We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Quantification of two-site kinetic transport parameters of polystyrene nanoplastics in porous media
Summary
This laboratory study tracked how polystyrene nanoplastics move through different soil types by measuring their transport through columns packed with quartz sand and clay minerals. Higher pH conditions reduced the ability of clay minerals to trap nanoplastics, meaning they traveled farther and faster through soil toward groundwater. Understanding these transport dynamics is key to predicting how nanoplastic contamination spreads through soils and ultimately reaches drinking water sources.
In this study, a combination of column experiments, interface chemistry theory and transport model with two-site kinetics was used to systematically investigate the effect of pH on the transport of polystyrene nanoparticles (PSNPs) in porous media. The porous media containing quartz sand (QS) and three kinds of clay minerals (CMs)-kaolinite (KL), illite (IL) and montmorillonite (MT), was used in column experiments to simulate the porous media in the soil-groundwater systems. Experimental results showed that the inhibitory effect of CMs on the transport of PSNPs is weakened as pH increases. The two-dimensional (2D) surface of the DLVO interaction energy (2D-pH-DLVO) was built to calculate the interactions between PSNPs and CMs under different conditions of pH. Results suggested the inflection point of PSNP-QS, PSNP-KL, PSNP-IL and PSNP-MT are 2.42, 3.30, 2.84 and 3.69, respectively. Most importantly, there was a significant correlation between the two-site kinetic parameters related to PSNPs transport and the DLVO energy barrier (DB). The contributions of the interactions of PSNPs-PSNPs and PSNPs-minerals were determined for PSNPs transport in porous media. The critical values of pH related to the migration ability of PSNPs in porous media could be determined by a combination of column experiments, 2D-pH-DLVO and PSNPs transport model. The critical values of pH were 2.95-3.01, 3.22-3.51, 2.98-3.02, 3.31-3.33 for the migration ability of PSNPs in QS, QS + KL, QS + IL and QS + MT porous media, respectively. The stronger migration ability of PSNPs under high pH conditions is attributed to the enhanced deprotonation of the media surface and increased negative surface charge, which increases the electrostatic repulsion between PSNPs and porous media (QS, CMs). Moreover, the agglomeration of PSNPs usually is weaker and the average particle size of agglomerates is smaller under the condition of high pH, thus leading to the stronger migration ability of PSNPs under high pH conditions.
Sign in to start a discussion.
More Papers Like This
Vertical transport of polystyrene nanoplastics in natural soils under unsaturated conditions: influence of particle size and texture
Laboratory experiments showed that polystyrene nanoplastics can travel downward through unsaturated soils, but larger particles and clay-rich soils retain them more effectively than smaller particles in sandy soils. Understanding how nanoplastics move through soil is important for predicting whether they will reach groundwater and contaminate drinking water sources.
Transport of polystyrene nanoplastics in natural soils: Effect of soil properties, ionic strength and cation type
Researchers used column experiments across three soil types to show that polystyrene nanoplastic transport is governed by soil iron and aluminum oxide content and pH — with high-pH, low-oxide soils allowing up to 97% nanoplastic passage — and that calcium ions and higher ionic strength significantly increase retention, revealing that soil chemistry strongly controls nanoplastic mobility toward groundwater.
Investigating transport kinetics of polystyrene nanoplastics in saturated porous media
Researchers investigated how ionic strength, pH, and organic matter influence the transport of polystyrene nanoplastics through saturated porous media using column experiments and DLVO modeling, finding that increasing sodium ion concentrations promote nanoplastic aggregation and reduce mobility in soil and groundwater systems.
Effect of particle size on the transport of polystyrene micro- and nanoplastic particles through quartz sand under unsaturated conditions
This study tested how different sizes of polystyrene micro and nanoplastics move through sand under conditions similar to soil with some moisture. Smaller particles (120 nanometers) passed through easily with 95% recovery, while larger particles (10,000 nanometers) were completely trapped. The findings suggest that the tiniest nanoplastics can readily travel through soil to reach groundwater, creating a potential pathway for plastic contamination of drinking water sources.
Mechanism of coupled phosphate‑calcium modulation of nanoplastic transport in porous media: Role of solution chemistry and surface interactions
Scientists used laboratory experiments and molecular simulations to study how phosphate and calcium ions in soil water affect whether polystyrene nanoplastics move freely through the ground or get trapped in soil particles. They found that pH was a key factor: at lower pH levels, phosphate helped nanoplastics travel farther while calcium restricted movement, with both effects linked to how these ions change the surface charge of both the particles and the soil. Understanding nanoplastic mobility in soil is essential for predicting contamination of groundwater and crops.