0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Detection Methods Environmental Sources Marine & Wildlife Sign in to save

The Project of an Autonomous Microboat with a Laser Device for Estimation of Water Area Pollution by Microplastic

Devices and Methods of Measurements 2023 1 citation ? Citation count from OpenAlex, updated daily. May differ slightly from the publisher's own count. Score: 30 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
В. А. Алексеев, S. I. Yuran, M. R. Zaripov, V. P. Usoltsev

Summary

This paper describes the design of an autonomous microboat equipped with a laser device for real-time detection and mapping of microplastic pollution in water bodies. Autonomous sensor platforms that can survey large water areas for microplastics could significantly improve environmental monitoring capabilities.

Polymers

Water area pollution by microplastic particles smaller than 5 mm is a serious environmental problem. Usually, studies of water pollution are carried out by taking water samples with their further analysis in the laboratory. Therefore, study of the water areas for the presence of plastic with the identification of extensive pollution sites in real time is actual. The project of an autonomous unmanned research vehicle operating in water area and transferring the research data to the information processing center is discussed in the article. The device produces laser probing of the aquatic environment to detect polyethylene microparticles and to build maps of pollution sites in the studied water area. To implement the proposed project, the following tasks are solved: detection of plastic microparticles in the studied volume of the water environment where particle sizes are several orders of magnitude smaller than the studied water volume; identification of microparticles in presence of particles of other types of substances in the investigated water environment volume; estimation of the number particles’ in the studied water environment A new approach which consists in creating an autonomous microboat that explores the water area along a route set from a control center located on the shore is proposed. The study involves the detection of microparticles in a certain volume of liquid flowing through a research tube installed in the bottom of the boat. There is a Schauberger tube in the central part of which particles are concentrated inside the tube. It makes possible to search for particles by laser probing with a wavelength about 3.5 μm, on which the peak absorption of light by polyethylene many times exceeds the water absorption. To ensure the energy efficiency of the microboat it is proposed to use a scheme for laser pulses combining using a fiber-optic delay line. This makes it possible to reduce the power consumption of the laser by almost an order of magnitude. The proposed project of the boat will make it possible to conduct studies of large water areas with the detection of plastic microparticles’ pollution sites. Examples of the used optical fiber, photodetector and laser source for the problem being solved are derived in the article.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Design and Implementation of a Microplastic Detection and Classification System Supported by Deep Learning Algorithm

Researchers designed and implemented a low-budget deep learning system for autonomous microplastic detection and classification in water, using three dual-wavelength lasers at 405 nm, 655 nm, and 534-807 nm to classify microplastics by size and type in real time.

Article Tier 2

Improvement and Empirical Testing of a Novel Autonomous Microplastics-Collecting Semisubmersible

Researchers improved an autonomous microplastic-collecting robot, testing design modifications that enhanced sampling efficiency and navigation in surface water environments, moving toward practical automated monitoring of plastic pollution.

Article Tier 2

Design and Validation of an Eco-Compatible Autonomous Drone for Microplastic Monitoring in Port Environments

Researchers designed and tested an autonomous drone system for monitoring microplastic pollution in port environments, where plastic tends to accumulate in semi-enclosed waters. The drone collected water surface samples and transmitted data in real time, demonstrating a practical tool for high-frequency environmental monitoring in busy maritime settings.

Systematic Review Tier 1

Exploring the Potential of Autonomous Underwater Vehicles for Microplastic Detection in Marine Environments: A Review

This review explores how autonomous underwater vehicles equipped with sensors could detect microplastics directly in the ocean, rather than relying on labor-intensive water sampling. Current detection methods are slow and expensive, making real-time monitoring difficult. Advances in onboard sensing technology could dramatically improve our understanding of where microplastics concentrate in marine environments.

Article Tier 2

A prototype of a portable optical sensor for the detection of transparent and translucent microplastics in freshwater

Researchers developed a portable prototype optical sensor capable of detecting transparent and translucent microplastics in freshwater by simultaneously measuring specular laser light reflection and transmission, offering a feasibility pathway for field-deployable microplastic monitoring.

Share this paper