0
Article Tier 2 Environmental Sources Sign in to save

Ethanol, not water, should be used as the dispersant when measuring microplastic particle size distribution by laser diffraction

The Science of The Total Environment 2023 21 citations

AI summary Read the abstract

Researchers tested various dispersants for measuring microplastic particle size distributions by wet laser diffraction, finding that ethanol was a far more effective dispersant than water for most polymer types. Using water as the dispersant, as is common practice, underestimates the degree of dispersion and can misrepresent the actual size distribution of microplastic particles.

Polymers

Size distribution is a crucial characteristic of microplastics (MPs). A typical method for measuring this property is wet laser diffraction. However, when measuring size distributions of MPs, despite it being a poor dispersant for many MPs, water is commonly selected, potentially limiting the reliability of reported measurements. To evaluate dispersant suitability, different aqueous concentrations of ethanol (0, 10, 20, 30, 40, 50, 75, 100 wt%) and aqueous solutions of 0.001 wt% Triton X-100 and a mixture comprising 10 wt% sodium pyrophosphate and 10 wt% methanol were used as dispersants in a laser granulometer (Mastersizer 2000) to determine particle size distributions (PSDs) of granular polyethylene MP35, MP125 and MP500 particles (nominally <35, <125 and, < 500 μm in size). The reliability of the PSDs depended on the dispersant used and size of primary MPs. With increasing ethanol concentrations, PSD curves of MP35 particles shifted from multi-modal to mono-modal distributions. The measured size distribution reduced from 1588.7 to 4.5 μm in water to 39.9 to 0.1 μm in 100 wt% ethanol. Generally, as ethanol concentration increased, uncertainty associated with the PSD parameters decreased. Although Triton X-100 and the mixed solution also showed better dispersion than water, measured particle sizes and coefficient of variation (COV, %) were notably larger than those for 100 wt% ethanol. Similar trends were observed for larger-sized MP125 and MP500 particles, but differences in PSD curves, PSD parameters, and COV (%) among dispersants were less pronounced. In all dispersants, the volume weighted mean diameters (VWMD) in 100 wt% ethanol (MP35: 14.1 μm, MP125: 102.5 μm, MP500: 300.0 μm) were smallest and close to diameters determined from microscope observations (MP35: 14.6 μm, MP125: 109.0 μm, MP500: 310.6 μm). Therefore, for accurate determinations of the PSDs of MP by wet laser diffraction, ethanol rather than water should be used as the dispersant.

More Papers Like This

Article Tier 2

A critical analysis on the limits and possibilities of the μ-Raman as a routine method for microplastics determination in drinking water

AI summary Read the abstract

This critical analysis examined the limits and practical possibilities of micro-Raman spectroscopy as a routine tool for microplastic identification, assessing throughput, detection limits, and the conditions under which it provides reliable polymer characterization.

Article Tier 2

Advanced Particle Size Analysis in High-Solid-Content Polymer Dispersions Using Photon Density Wave Spectroscopy

AI summary Read the abstract

Not relevant to microplastics research; this paper develops a new spectroscopic method for measuring the size of polymer nanoparticles in concentrated industrial dispersions, focused on manufacturing quality control rather than environmental microplastic pollution.

Article Tier 2

Effect of medium refractive index on microparticle characterization by optical scattering

AI summary Read the abstract

Researchers investigated how the refractive index of the medium affects optical scattering measurements used to characterize microplastic particles, finding that medium choice significantly influences size estimation accuracy. Machine learning was applied to improve classification of particles under varying optical conditions.

Article Tier 2

Identifying microplastic contamination in drinking water: analysis and evaluation using spectroscopic methods

AI summary Read the abstract

Researchers developed analytical methods to identify and quantify microplastic contamination in drinking water, evaluating extraction efficiency and detection accuracy across different water types and plastic particle sizes. The study assessed health implications based on measured plastic loads in treated water.

Article Tier 2

Analysis of microplastics in drinking water and other clean water samples with micro-Raman and micro-infrared spectroscopy: minimum requirements and best practice guidelines

AI summary Read the abstract

Researchers compiled best-practice guidelines for detecting and quantifying microplastics in drinking water using micro-Raman and micro-infrared spectroscopy, establishing minimum requirements for sample preparation, measurement parameters, and data reporting to improve comparability across studies.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper