We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
ВПЛИВ СВІТЛОСТАБІЛІЗАТОРІВ ТА НАНОРОЗМІРНИХ ЧАСТИНОК ДІОКСИДУ КРЕМНІЮ НА ШВИДКІСТЬ ДЕСТРУКЦІЇ ПОЛІМЕРНИХ ПОКРИТТІВ ПІД ДІЄЮ УФ-ВИПРОМІНЮВАННЯ
Summary
This study examined how nanoscale silica particles and UV stabilizers affect the degradation rate of polymer coatings under ultraviolet radiation, finding that 30% silica content accelerates oxidation of the base polymer but slows mass and thickness loss. The research is relevant to understanding how plastic coatings degrade under sunlight, contributing to the generation of micro- and nanoplastic particles in the environment.
Мета. Дослідження впливу введення до складу тонкошарових покриттів нанорозмірних добавок та ультрафіолетових стабілізаторів на процеси їх деструкції під дією ультрафіолетового випромінювання. Методика. В даній роботі в якості полімерного зв’язуючого використовувався стирол-акриловий співполімер. Як поглинач ультрафіолетового випромінювання було використано світлостабілізатор основного утрудненого аміну (HALS). Кремнезем використовувався як наповнювач та агент для блокування УФ-випромінювання. Покриття було нанесено на поліровані алюмінієві підкладки сплаву 6063 та на KBr скло методом пневматичного розпилення. Дослідження хімічних перетворень у складі покриття було здійснено за допомогою ІЧ спектрометрії. Для характеристики ступеня деградації полімеру було використано карбонільний індекс. Характеристика хімічних перетворень на поверхні була здійснена за допомогою вимірювання кута змочування. Результати. В роботі показано, що нанорозмірні частинки при вмісті 30 мас. % прискорюють окислення основного полімеру. При цьому вміст наночастинок 30–50 мас. % сповільнює втрату маси і товщини покриття на підкладці в 2,5–3 рази. Показано, що плівки на основі чистого стиролбутилметакрилата з вихідним кутом змочування водою 88° за годину експозиції значно підвищують гідрофільність: кут змочування знижується до 40°. Наукова новизна. У результаті роботи встановлено ступінь впливу наночастинок кремнезему на фізико-хімічні властивості покриття в системі плівкоутворювач – неорганічний наповнювач з додаванням УФ стабілізатора. Практична значимість. Виявлені закономірності показали, що нанорозмірні частинки кремнезему впливають на хід фотодеструкції тонкошарових покриттів на основі стиролбутилметакрилатного плівкоутворювача. З точки зору забезпечення стабільності водовідштовхування для систем, які призначенні до використання в атмосферних умовах, цей вплив є негативним. Питання підвищення стабільності потребує подальшого дослідження.
Sign in to start a discussion.
More Papers Like This
Modifications of Polymers through the Addition of Ultraviolet Absorbers to Reduce the Aging Effect of Accelerated and Natural Irradiation
Ultraviolet absorbers added to polymer formulations were reviewed for their effectiveness in reducing photodegradation, which can break polymer bonds and form free radicals that accelerate microplastic generation, with the review identifying conditions where UV stabilizers most effectively extend plastic service life.
Effects of UV radiation on natural and synthetic materials
Researchers reviewed how solar UV radiation degrades natural and synthetic materials like wood and plastic, noting that climate change may shorten material lifespans and that photodegradation of plastic waste is a key driver of microplastic generation — while also surveying emerging nanoscale stabilizers that could make materials more UV-resistant.
Влияние ультрафиолетового излучения на фрагментацию полимеров в водной среде
This review examines how UV radiation drives polymer fragmentation in aquatic environments through autocatalytic thermal oxidation initiated by solar radiation, which combined with wind and mechanical stress causes molecular chain scission. The authors also discuss how prior UV aging accelerates subsequent mechanical fragmentation, providing a mechanistic framework for understanding microplastic generation from larger plastic items in water.
Degradation rates and ageing effects of UV on tyre and road wear particles
Researchers studied how UV light degrades tire and road wear particles, which are considered the largest source of microplastics in the environment. They found that UV exposure caused significant surface cracking and chemical changes in the rubber particles, accelerating their breakdown into smaller fragments. The study provides important data on how quickly these particles degrade outdoors, which helps predict their long-term environmental fate and accumulation.
Investigation of Surface Alteration of Microplastics by Using UV Irradiation
UV radiation causes polystyrene and other plastic microparticles to undergo photooxidative degradation, changing their surface chemistry and potentially making them more likely to adsorb or release chemical pollutants. Understanding these weathering processes is important for predicting the environmental behavior and toxicity of microplastics.