We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Oxidation of polystyrene nanoparticles using ozonation under catalytic and non-catalytic conditions
Summary
This study tested whether ozone treatment — a powerful oxidant used in water treatment — can break down polystyrene nanoparticles, which persist through conventional water treatment processes. Ozonation achieved partial degradation of the nanoplastics under both catalytic and non-catalytic conditions, with surface oxidation and chain scission as the main degradation mechanisms. The findings suggest advanced oxidation processes could be adapted to remove nanoplastics from drinking water, a critical gap in current treatment infrastructure.
Abstract Plastic pollution surfaced as a major issue across the globe affecting all compartments of the environment alike. The viciousness of plastics further elevates as they breaks down to form micro and nano sized particles which can easily enter into the body of organisms through water, air and food. These particles persist in the water stream even after conventional waste water and drinking water treatment processes and can easily get accumulate in living organisms including humans. Advanced oxidation processes (AOPs) emerged as an effective strategy for the disintegration leading to even complete mineralisation of many persistant pollutants present in the environment. Various AOP methods like photo-degradation, ozonation, electro-fenton and anodic oxidation are studied for their applicability in degrading synthetic polymer particles also. The present study evaluates the oxidative removal of polystyrene nanoparticles by ozone based oxidation in aqueous medium. Catalytic ozonation was also carried out using TiO 2 and V 2 O 5 as catalysts. Particles of 200-400nm size were synthesised by nanoprecipitation technique, suspended in aquadest of variable pH conditions (5, 7 and 9) and subjected to ozonation for 60 minutes. DLS analysis revealed about 75% size reduction of particles upon ozonation. The reduction of organic carbon content in the samples after treatment was evaluated through TOC analysis and highest TOC removal rate of 97.78% was obtained with TiO 2 as catalyst at pH 7. TiO 2 was an effective catalyst under all pH conditions while catalytic activity of V 2 O 5 found to be increasing with the increase in pH. The results relieved the possibility of using ozonation as a method of nanoplastic remediation from water.
Sign in to start a discussion.
More Papers Like This
Enhancing nanoplastics removal by metal ion-catalyzed ozonation
Researchers found that while standard ozone water treatment reduced the size of polystyrene nanoplastics by over 99% in under five minutes, it left behind smaller fragments and achieved only 16% actual destruction; adding cobalt as a catalyst dramatically improved breakdown to 70% mineralization. The findings reveal an important trade-off: ozonation used for water disinfection may actually generate more, smaller nanoplastic particles unless a catalytic process is included.
Ozone-mediated breakdown of microplastics in aqueous environments
Researchers examined how ozone-based advanced oxidation processes break down microplastics in water treatment settings. They found that while ozone can degrade certain plastics, the effectiveness varies depending on particle size, polymer type, and treatment conditions, and the process may generate nanoplastic byproducts. The study highlights both the promise and limitations of ozone treatment as a strategy for removing microplastics from wastewater.
Enhanced ozonation of polystyrene nanoplastics in water with CeOx@MnOx catalyst
Researchers developed a core-shell CeOx@MnOx catalyst to enhance ozone-based degradation of polystyrene nanoplastics in water, finding that the catalyst significantly improved removal efficiency. The system offers a promising approach for treating nanoplastic-contaminated water given the difficulty of natural decomposition.
Plasma-assisted destruction of polystyrene nanoplastics
Researchers developed a plasma-based method to destroy polystyrene nanoplastics in water, achieving a 98.4% removal rate within one hour of treatment. The process breaks the nanoplastics down into very short polymer fragments, and proved more effective than traditional ozone treatment. The study presents a promising new technology for addressing nanoplastic contamination in water purification systems.
Degradation of Polystyrene Nanoplastics in UV/NaClO and UV/PMS Systems: Insights into Degradation Efficiency, Mechanism, and Toxicity Evaluation
Researchers tested two advanced oxidation methods for breaking down polystyrene nanoplastics in water and found that while both effectively reduced water cloudiness, neither completely destroyed the plastic particles. The UV/PMS system achieved about 29% mineralization compared to only 7% for UV/NaClO, though both generated some toxic byproducts. The study suggests that advanced oxidation processes show promise for nanoplastic removal from water but require further optimization to achieve complete degradation.