We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
The use of hydrodynamic cavitation for waste-to-energy approach to enhance methane production from waste activated sludge
Summary
Four hydrodynamic cavitation pre-treatment regimes for waste activated sludge were compared using a lab-scale generator, finding that cavitation pre-treatment improves sludge disintegration and enhances methane production in subsequent anaerobic digestion.
Anaerobic digestion in wastewater treatment plants converts its unwanted end product - waste activated sludge into biogas. Even if the process is well established, pre-treatment of the sludge can further improve its efficiency. In this study, four treatment regimes for increasing methane production through prior sludge disintegration were investigated using lab-scale cavitation generator and real sludge samples. Three different cavitating (attached cavitation regime, developed cloud shedding cavitation regime and cavitation in a wake regime) and one non-cavitating regime at elevated static pressure were studied in detail for their effectiveness on physical and chemical properties of sludge samples. Volume-weighted mean diameter D[4,3] of sludge's particles decreased by up to 92%, specific surface area increased by up to 611%, while viscosity (at a shear rate of 3.0 s-1) increased by up to 39% in the non-cavitating and decreased by up to 24% in all three cavitating regimes. Chemical changes were more pronounced in cavitating regimes, where released soluble chemical oxygen demand (sCOD) and increase of dissolved organic matter (DOM) compounds by up to 175% and 122% were achieved, respectively. Methane production increased in all four cases, with the highest increase of 70% corresponding to 312 mL CH4 g-1 COD. However, this treatment was not particularly efficient in terms of energy consumption. The best energy balance was found for the regime with a biochemical methane potencial increase of 43%.
Sign in to start a discussion.
More Papers Like This
Integral analysis of hydrodynamic cavitation effects on waste activated sludge characteristics, potentially toxic metals, microorganisms and identification of microplastics
Researchers investigated hydrodynamic cavitation as a pretreatment for waste activated sludge, analyzing its effects on sludge characteristics, toxic metals, microorganisms, and identifying microplastics present in the sludge to improve anaerobic digestion efficiency.
Integral analysis of hydrodynamic cavitation effects on waste activated sludge characteristics, potentially toxic metals, microorganisms and identification of microplastics
Researchers tested hydrodynamic cavitation — a process using high-speed water flow to create pressure changes — as a pretreatment to improve sewage sludge digestion and measured its effects on microplastics in the sludge. The process reduced some sludge properties that limit biogas production, but its effect on microplastic fragmentation was also assessed. The study is relevant to understanding how wastewater treatment alters microplastic size and abundance in sludge spread on farmland.
Conversion of Materials and Energy in Anaerobic Digestion of Sewage Sludge with High-Pressure Homogenization Pretreatment
Not a microplastics paper — this study evaluates high-pressure homogenization as a pretreatment for sewage sludge before anaerobic digestion, finding it increases methane gas yield by up to 57% while helping to optimize energy use in wastewater treatment.
A perspective on hydrothermal processing of sewage sludge
Researchers reviewed hydrothermal processing as a strategy for treating sewage sludge, finding it can recover eleven times more energy than landfilling and, when integrated with anaerobic digestion, offers a scalable approach to converting the 79 million dry tons of liquid organic waste the US generates annually.
Evaluating the Effects of Different Pretreatments on Anaerobic Digestion of Waste Activated Sludge Containing Polystyrene Microplastics
Researchers found that thermal and chemical pretreatments improved methane yields by 17-20% during anaerobic digestion of waste activated sludge containing polystyrene microplastics, though chemical methods caused greater leaching of additives from the plastic particles.