We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Microplastics in advanced biological wastewater treatment plant of Kocaeli, Turkey: point source of microplastics reaching Marmara Sea
AI summary Read the abstract
A detailed assessment of a large Turkish wastewater treatment plant found that while 89.9–91% of incoming microplastics were removed overall, the effluent still discharged significant fiber concentrations into the Marmara Sea, and sludge accumulated 14–25 times higher MP concentrations than influent. Even high-efficiency treatment plants remain point sources of microplastic pollution, and the sludge concentration problem means land application of biosolids may reintroduce microplastics directly into agricultural soils.
Urban wastewater treatment plants (WWTPs) are major contributors of microplastics (MPs) in the environment, despite achieving relatively high removal percentages. This study conducted a comprehensive assessment of the abundance and characteristics of MPs in wastewater and sludge at various treatment stages at Gebze WWTP located in the Marmara Sea, for the first time. The influent exhibited an average MPs concentration of 70.1 ± 28.6 MPs/L. After undergoing the fine screen and grit chamber units, the MPs concentration significantly reduced to 19.7 ± 3.6 MPs/L, indicating an impressive removal rate of 71.8%. Upon completion of the secondary treatment, the effluent contained 7.1 ± 1.7 MPs/L, resulting in an overall MP removal of 89.9–91.0%. The findings indicated that fibers constituted the predominant particle shape, followed by fragments. Fibers were effectively removed through primary treatment (71.8%), while fragments were efficiently removed during secondary treatment (81.1%). The analysis of sludge samples from the aeration basin and sludge thickening tank revealed higher concentrations, with 14.3 and 25 folds increase compared to the influent, respectively indicating the accumulation of MPs in sludge. Despite the treatment process, it is noteworthy that the effluent still exhibited a significant abundance of fibers. Micro-Raman analysis identified polyethylene and polypropylene as the main polymer types present. Although the WWTP demonstrated a high overall removal rate, an estimated 1022.4 × 106 ± 244.8 × 106 MPs/d were still being discharged with the effluent into the Marmara Sea. Recognizing the potential impact of MPs on marine organisms, measures, such as introduction of tertiary treatment processes, were taken to mitigate this issue.
More Papers Like This
Microplastics in municipal wastewater treatment plants: a case study of Denizli/Turkey
AI summary Read the abstract
"A case study of a municipal wastewater treatment plant in Denizli, Turkey, found that despite achieving over 95% microplastic removal efficiency, the facility still discharged approximately 12.8 billion microplastic particles per day into the receiving environment, with fibers as the dominant shape. This underscores that even high-performing WWTPs are significant point sources of microplastic pollution and that current treatment technology alone cannot protect aquatic ecosystems."
Determination of microplastics in drinking water treatment plants and tap water in Kocaeli, Turkey
AI summary Read the abstract
Researchers tested drinking water in Turkey and found that treatment plants remove roughly 60-76% of microplastic particles, but even after treatment, and still in the water coming out of people's taps, thousands of tiny plastic particles remained per liter, most smaller than a grain of sand (1-20 micrometers). This matters because it shows that standard water treatment doesn't fully filter out microplastics, meaning people are likely drinking small amounts of plastic daily, though scientists are still studying what this means for long-term health.
Effects of Industrial and Domestic Wastewater Treatment Plants on Microplastic Pollution in an Urban River in Türkiye
AI summary Read the abstract
Seasonal monitoring of two Turkish urban rivers found microplastic concentrations up to 146 particles per liter in water and 136,177 particles per kilogram in sediment, with the highest levels near wastewater treatment plant outfalls. Wastewater treatment plants are major chokepoints for microplastic pollution — without upgrades to remove plastics, they become a direct pipeline from human activity to aquatic ecosystems.
Detection of Microplastic in Wastewater Treatment Plants
AI summary Read the abstract
Researchers investigated microplastic detection methods in wastewater treatment plants, finding that while these facilities capture a significant fraction of microplastics, they also concentrate and potentially redistribute particles and co-contaminants into aquatic environments through effluent and biosolids.
Wastewater Treatment Plants as Hotspots of Microplastic Pollution
AI summary Read the abstract
This review characterizes wastewater treatment plants as hotspots of microplastic pollution, documenting how these facilities receive, partially retain, and release large quantities of microplastics into aquatic environments. The incomplete removal of microplastics by wastewater treatment plants means treated effluent remains a major source of pollution in rivers and coastal waters, sustaining the cycle of environmental contamination and human dietary exposure.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.