0
Article Tier 2 Nanoplastics Sign in to save

Interaction of chitosan with nanoplastic in water: The effect of environmental conditions, particle properties, and potential for in situ remediation

The Science of The Total Environment 2023 24 citations

AI summary Read the abstract

Researchers tested chitosan — a natural polymer derived from shellfish — as a tool to aggregate and remove nanoplastic particles from water, finding it caused clumping at low doses but that high pH, dissolved organic matter, and surface chemistry of the plastics all affected its performance. The results suggest chitosan-based treatment has real potential for water remediation but requires careful tuning of environmental conditions.

Polymers

Micro- and nanoplastic (MNP) pollution in aquatic ecosystems requires investigation on its source, transport, and extent to assess and mitigate its risks. Chitosan is a potential biomolecule for water treatment, but its interaction with MNP is undefined. In this work, chitosan-nanoplastic interaction was explored in the laboratory under environmentally relevant conditions using polystyrene (PS) nanoplastic (NP) as model particle to identify conditions at which PS-chitosan interaction resulted in aggregation. Aggregation limits NP transport and allows separation of NP for targeted remediation. The effect of environmental conditions (pH, salinity, dissolved organic matter (DOM) content), chitosan particle size and NP surface modification on chitosan-NP interaction was studied at various chitosan doses. PS aggregated at chitosan doses as low as 0.2 % w/w, while higher doses of chitosan resulted in re-stabilization of NP in solution, restoring the particle size to its initial value. Increasing pH, DOM, or carboxyl modification of the NP surface also improved NP stability in solution. Increased salinity of the solution caused aggregation of unmodified PS independent of chitosan, but carboxyl-modified PS remained stable and aggregated at the same chitosan doses across all salinity levels. Chitosan with low molecular weight promoted PS aggregation at lower doses. Notably, zeta potential (ZP) alone did not indicate chitosan-induced PS aggregation, which occurred independently of changes in ZP. DLVO calculations based on ZP, however, still indicated attractive interaction due to charge differences, albeit with less contrast at high pH, salinity, and DOM content. Additional insights gained in the work recommend caution when using spectrophotometric methods to assess NP removal. Overall, this study demonstrates that chitosan impacts NP transport and holds potential for water remediation of NP.

More Papers Like This

Article Tier 2

Optimisation of Chitosan as A Natural Flocculant for Microplastic Remediation

AI summary Read the abstract

Laboratory tests found that chitosan — a natural, biodegradable material derived from shellfish — can remove 68.3% of microplastics from water using a coagulation-flocculation process, with an optimal concentration of 30 ppm. Higher chitosan doses increased organic matter in the water (COD and BOD), suggesting a trade-off between microplastic removal efficiency and water quality parameters. Chitosan offers a promising eco-friendly alternative to synthetic chemicals for treating microplastic-contaminated water.

Article Tier 2

Utilization of chitosan as a natural coagulant for polyethylene microplastic removal

AI summary Read the abstract

Scientists tested chitosan, a natural material derived from shellfish, as an eco-friendly way to remove polyethylene microplastics from water. Under the best conditions (pH 6.0 with 100 mg/L of chitosan), the treatment removed 81.5% of microplastics, offering a promising and environmentally safe approach to cleaning microplastic-contaminated water.

Article Tier 2

Synergistic removal of microplastic fibres: Integrating Chitosan coagulation in hybrid water pre-treatment systems

AI summary Read the abstract

Microplastic fibers are the most common type of microplastic found entering water treatment plants, yet their elongated shape makes them especially hard to remove with conventional filters. This study investigated using chitosan — a natural, biodegradable material derived from crustacean shells — as a "green" coagulant to clump fibers together so they can be more easily removed, and also developed chemically modified versions of chitosan that work across a wider range of water conditions. The results showed that combining chitosan-based coagulation with microbubble aeration creates a synergistic pretreatment system that significantly improves microplastic fiber removal while avoiding the residual metal ions left by conventional chemical coagulants.

Article Tier 2

The use of chitosan for water purification from microplastics

AI summary Read the abstract

Researchers investigated chitosan as a sorbent for removing microplastics from water, analyzing its physicochemical properties and proposing an optimized purification method based on chitosan's sorption characteristics.

Article Tier 2

Synergistic removal of microplastic fibres using hybrid pre-treatment: evaluation of Chitosan as a green coagulant

AI summary Read the abstract

Researchers evaluated the capacity of existing water treatment pre-treatment methods to remove microplastic fibers and investigated chitosan — a low-molecular-weight, 75-85% deacetylated green coagulant — as an alternative to conventional chemical coagulants. The study assessed a hybrid pre-treatment approach, finding synergistic microplastic fiber removal efficiency when chitosan was combined with existing processes.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper