We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Transformation of Single‐Use Plastics into Lighter Hydrocarbons via an Economical Coal Fly Ash based Zeolite Catalyst
Summary
This study is not directly about microplastics — it focuses on using coal fly ash-derived zeolite catalysts to break down single-use plastic waste (LDPE) into lighter hydrocarbons via pyrolysis, a chemical recycling approach.
Abstract A mixture of zeolite X and A, derived from coal fly ash (CFA), was protonated and utilized as an acid catalyst to decompose single‐use plastics (SUP) waste into lighter hydrocarbons. Low‐density polyethylene (LDPE) was selected as the source of SUP, and this study aimed to investigate the catalytic effects of the protonated CFA‐derived zeolite (H‐XA) as an economical option on the LDPE pyrolysis temperature and output. CFA converted into H‐XA through the conventional alkali fusion, followed by sonication and simplified hydrothermal and protonation processes. The impact of the alkali agent ratio on the resulting product was investigated, and outcomes were evaluated. The product with optimum properties was then selected for investigation in the LDPE pyrolysis studies. Finally, the results were compared with commercial Protonated Zeolite Socony Mobil‐5 (H‐ZSM5) and thermal decomposition without catalysts. Regarding LDPE degradation temperature, H‐XA could lower that by 97 °C compared to thermal degradation, which was almost the same as commercial H‐ZSM5 with 110 °C. The pyrograms obtained through the Pyrolysis‐gas chromatography‐mass spectrometry (Py‐GCMS) analysis indicated the elimination of heavier hydrocarbons in the presence of H‐XA and the product spectra laid in the range of C3 to C9, which was entirely different from the LDPE with hydrocarbons of varying lengths. Moreover, kinetic studies on the LDPE decomposition reactions in this work have revealed that LDPE conversion occurs at a lower activation energy level in the presence of H‐XA, which is comparable to the energy level observed when H‐ZSM5 is used as the catalyst. The synthesis of H‐XA with desirable catalytic activity, such as the ability to lower the LDPE degradation temperature and make lighter hydrocarbons as the pyrolysis output, suggests the great potential of the CFA‐based acid catalyst for use in SUP recycling. This represent a game of waste versus waste within the framework of the circular economy, where the environment is the ultimate winner.
Sign in to start a discussion.
More Papers Like This
Liquid fuel production from catalytic pyrolysis of municipal plastic waste using synthesized Zeolite from Kaolin
This paper is not relevant to microplastics research — it evaluates a catalytic pyrolysis process using zeolite from kaolin to convert municipal plastic waste into liquid fuel as an alternative energy source.
Thermal and catalytic pyrolysis of a real mixture of post-consumer plastic waste: An analysis of the gasoline-range product
Researchers performed thermal and catalytic pyrolysis on real post-consumer plastic waste mixtures using various catalysts, finding that polymer type strongly influenced gas, liquid, and char yields, and that zeolite catalysts produced gasoline-range hydrocarbon liquids with commercially viable compositions from mixed plastic feedstocks.
Recent Progress in Low-Cost Catalysts for Pyrolysis of Plastic Waste to Fuels
This review evaluated low-cost catalysts — including zeolites, clays, and bimetallic materials — for the pyrolytic conversion of plastic waste into fuel, comparing their effects on product yield and quality and highlighting promising candidates for scaling up plastic-to-fuel processes.
Pyrolysis as a value added method for plastic waste management: A review on converting LDPE and HDPE waste into fuel
This review focuses on pyrolysis as a method to convert waste LDPE and HDPE plastics into liquid fuel, summarizing reactor types, catalysts, and the factors influencing fuel yield and quality. While not about microplastics directly, it addresses the upstream problem of plastic waste accumulation — particularly the conversion of plastics that would otherwise persist in the environment and fragment into microplastics — into usable energy resources.
Impact of Metal Impregnation of Commercial Zeolites in the Catalytic Pyrolysis of Real Mixture of Post-Consumer Plastic Waste
This study tested the catalytic pyrolysis of real mixed post-consumer plastic waste using metal-impregnated commercial zeolites, finding that metal loading significantly influenced product yields and selectivity toward fuel-range hydrocarbons.