We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Upcycling of HDPE Milk Bottles into High-Stiffness, High-HDT Composites with Pineapple Leaf Waste Materials
AI summary Read the abstract
Not relevant to microplastics — this study explores recycling used HDPE milk bottles into reinforced plastic composites using pineapple leaf fiber waste, focused on materials engineering rather than pollution.
In the pursuit of sustainability and reduced dependence on new plastic materials, this study explores the upcycling potential of high-density polyethylene (HDPE) milk bottles into high-stiffness, high-heat-distortion-temperature (HDT) composites. Recycled high-density polyethylene (rHDPE) sourced from used milk bottles serves as the composite matrix, while reinforcing fillers are derived from dried pineapple leaves, comprising fibers (PALF) and non-fibrous materials (NFM). A two-roll mixer is employed to prepare rHDPE/NFM and rHDPE/PALF mixtures, facilitating filler alignment in the resulting prepreg. The prepreg is subsequently stacked and pressed into composite sheets. The introduction of PALF as a reinforcing filler significantly enhances the flexural strength and modulus of the rHDPE composite. A 20 wt.% PALF content yields a remarkable 162% increase in flexural strength and a 204% increase in modulus compared to neat rHDPE. The rHDPE/NFM composite also shows improved mechanical properties, albeit to a lesser degree than fiber reinforcement. Both composites exhibit a slight reduction in impact resistance. Notably, the addition of NFM or PALF substantially elevates HDT, raising the HDT values of the composites to approximately 84 °C and 108 °C, respectively, in contrast to the 71 °C HDT of neat rHDPE. Furthermore, the overall properties of both the composites are further enhanced by improving their compatibility through maleic anhydride-modified polyethylene (MAPE) use. Impact fracture surfaces of both composites reveal higher compatibility and clear alignment of NFM and PALF fillers, underscoring the enhanced performance and environmental friendliness of composites produced from recycled plastics reinforced with pineapple leaf waste fillers.
More Papers Like This
Toward a Circular Bioeconomy: Development of Pineapple Stem Starch Composite as a Plastic-Sheet Substitute for Single-Use Applications
AI summary Read the abstract
This paper is not about microplastics; it develops a biodegradable composite material from pineapple stem starch as a substitute for hard-to-recycle single-use plastic items.
A Life Cycle Assessment of HDPE Plastic Milk Bottle Waste Within Concrete Composites and Their Potential in Residential Building and Construction Applications
AI summary Read the abstract
This study evaluated using recycled HDPE plastic milk bottles as an ingredient in concrete for residential construction, analyzing the full environmental impact from production through disposal. While incorporating plastic waste into concrete can divert it from landfills, the research found trade-offs in material strength and environmental performance. The approach could help reduce the amount of plastic waste that eventually breaks down into microplastics in the environment.
Material Development and Properties of Medium-Density Board from Low and High-Density Polyethylene
AI summary Read the abstract
Not directly relevant to microplastic pollution research. This engineering study creates medium-density boards from waste polyethylene plastics and tests their mechanical properties for use in furniture and construction—a materials recycling study rather than a pollution or health impacts study.
Sustainable Concrete Development Using the Plastic Bottle Waste
AI summary Read the abstract
Researchers outline how polyethylene plastic bottle waste can be repurposed as a construction material, framing the approach as a means to address the dual problems of non-biodegradable waste accumulation and rising demand for conventional building aggregates.
Optimization of Asphalt Concrete Performance Using Waste Plastic Bottles (WPB) as a Sustainable Bitumen Modifier: A Comprehensive Rheological and Mechanical Assessment
AI summary Read the abstract
Not relevant to microplastics — this study evaluates waste plastic bottles as a bitumen modifier to improve asphalt road performance, testing mechanical and thermal properties; it addresses plastic reuse in construction rather than environmental microplastic pollution.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.