We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Upcycling waste tempura flake-derived starch powder as an environment-friendly polymer matrix filler for thermoplastic starch compounds
Summary
Not relevant to microplastics — this study upcycles starch powder from restaurant waste tempura flakes as a filler for thermoplastic starch, finding it decreases tensile strength but increases elongation, with potential as a low-cost, food-waste-derived material additive.
Waste tempura flakes collected from local restaurants were upcycled to be utilized as a polymer filler material. The oil fraction in collected waste tempura flakes were extracted two times via centrifugal solid-liquid separation and organic solvent extraction. Then, oil-extracted residual starch was freeze-milled to produce fine powders. Waste tempura flake-derived starch powder was substituted with 1%, 3%, and 5% (wt%) of virgin starch powder to produce thermoplastic starch. Composition, X-ray diffraction, and Fourier transform infrared analyses showed that the mixture was successfully thermally plasticized. Substitution of waste tempura flake-derived starch decreased tensile strength while increasing elongation at break of some samples. Produced thermoplastic starch samples again were compounded with polylactic acid (PLA) and poly-butylene adipate-co-terephthalate (PBAT) following a mixing ratio of 3:5:2. The analyses indicated that thermoplastic starch, PLA, and PBAT were successfully compounded. The compound containing 1 wt% substituted thermoplastic starch showed the minimal mechanical strength decrease. This study revealed the possibility of upcycling waste fried food into a valuable bioplastic material. Waste tempura flakes can be utilized as both bio-jet fuel and bioplastic filler material.
Sign in to start a discussion.
More Papers Like This
Study of structure and properties of biodegradable composite films based on thermoplastic starch
Researchers studied the structure and properties of biodegradable thermoplastic starch composites as potential replacements for conventional polyethylene plastics. Using starch — a natural, renewable polymer — as a filler in plastic films could reduce microplastic pollution by enabling faster environmental breakdown.
Introduction to Starch-Based Bioplastics
This review introduces starch-based bioplastics as a sustainable alternative to conventional fossil fuel-derived plastics, examining the composition and properties of starch polymers. The study discusses how starch-based materials could help address microplastic pollution concerns associated with traditional plastics, though challenges remain in improving their mechanical strength and moisture resistance.
Utilization of Mango Seed Starch in the Manufacture of Polyester-Based Bioplastics
This materials science paper is not primarily about environmental microplastics; it investigates using mango seed starch as a filler in polyester-based bioplastic composites, aiming to produce biodegradable plastics from agricultural waste as a more sustainable alternative to conventional petroleum-based plastics.
Sorbitol-Based Biodegradable Plastics from Rubberized Cassava Starch and Tofu Dregs Starch
Not relevant to microplastics — this study develops biodegradable plastic from cassava starch and tofu dregs with sorbitol as a plasticizer, focused on creating a petroleum-free alternative material rather than addressing microplastic contamination.
Analysis of the microplastic emission potential of a starch-based biodegradable plastic material
Researchers developed a method to assess the microplastic emission potential of biodegradable starch-based plastics under environmental conditions, finding that even materials labeled biodegradable can fragment into persistent microplastic particles depending on environmental degradation pathways.