We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Enhanced removal of polyethylene microplastics from water through polymeric ferric sulfate with laminarin
Summary
Researchers developed an enhanced coagulation technique using polymeric ferric sulfate combined with laminarin, a seaweed-derived compound, to remove polyethylene microplastics from water. The combined approach achieved a 93.8% removal rate compared to only 48.5% with the coagulant alone, by significantly boosting charge neutralization and adsorption bridging mechanisms. The study demonstrates that natural coagulant aids can substantially improve the effectiveness of microplastic removal during water treatment.
Coagulation has been demonstrated as an effective method for eliminating microplastics from water. However, based on the existing literature, the use of a single coagulant has not yet yielded satisfactory results in microplastic removal. Hence, it is crucial to investigate the potential of enhanced coagulation techniques. In this study, laminarin (LA) was used as a novel coagulant aid to investigate its enhanced coagulation performance in the removal of polyethylene (PE) microplastics using polymeric ferric sulfate (PFS). The coagulation mechanism was investigated through zeta potential , Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The results demonstrated that the coagulation efficiency of PFS on PE microplastics could be improved by adding an appropriate amount of LA. The removal rates of PE microplastics by single PFS and PFS-LA reached 48.5% and 93.8%, respectively, when the dosages of PFS and LA were 250 mg/L and 5 mg/L. The coagulation mechanisms of PFS and PFS-LA on PE microplastics were found to be the same, with the addition of LA significantly enhancing the effects of charge neutralization, adsorption bridging, and sweep flocculation of PFS. Various experiments conducted under different pH levels, microplastic particle sizes, coexisting ions, humic acid coexistence, and real water conditions demonstrated that the PFS-LA complex coagulation system exhibited better environmental adaptability.
Sign in to start a discussion.
More Papers Like This
Efficiency and mechanism of micro- and nano-plastic removal with polymeric Al-Fe bimetallic coagulants: Role of Fe addition
Researchers investigated polymeric Al-Fe bimetallic coagulants for removing micro- and nanoplastics from drinking water, finding that iron addition enhanced nanoplastic removal efficiency through improved charge neutralization and floc formation mechanisms.
Microplastics removal from natural surface water by coagulation process
Researchers compared the effectiveness of ferrous and aluminum sulfate coagulants for removing microplastics from natural surface water, finding that both successfully removed polystyrene and polyvinyl chloride particles. Ferrous sulfate showed slightly higher removal efficiency, and the addition of coagulant aids further improved results. The study demonstrates that conventional coagulation processes already used in drinking water treatment can meaningfully reduce microplastic contamination.
Enhanced Removal of Polystyrene Microplastics from Water Through Coagulation Using Polyaluminum Ferric Chloride with Coagulant Aids
Researchers tested enhanced coagulation using modified coagulants to remove polystyrene microplastics from water, finding that surface-modified coagulants achieved significantly higher removal efficiencies than conventional alum. Removal reached over 90% under optimized conditions, demonstrating a practical upgrade pathway for conventional water treatment plants to reduce microplastic discharge.
Enhancing nano and microplastics destabilization: Synergistic effects of natural mucin and conventional coagulants in water and wastewater treatment
Researchers investigated whether combining jellyfish mucus with conventional water treatment coagulants could improve removal of micro- and nanoplastics from water. The synergistic combination achieved over 90% removal efficiency with settling times under 5 minutes, outperforming either agent alone by leveraging bridging and entrapment mechanisms.
Magnetic polymeric ferric magnesium chloride: Fe species distribution, characterization and coagulation removal of microplastics in water
Researchers developed a magnetic polymeric ferric magnesium chloride (MPFMC) coagulant and characterized its iron species distribution and physicochemical properties for use in removing microplastics from water. The study elucidated the coagulation mechanism by which MPFMC captures microplastic particles, demonstrating its potential as an efficient water treatment agent.