We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Tracing of Di-Ethylhexyl Phthalate in the Tequila Production Process
AI summary Read the abstract
Researchers traced the endocrine-disrupting chemical DEHP through the tequila production process at three different-sized factories. They found that while raw materials like agave and water contained low levels of DEHP, the primary contamination sources were lubricant greases and neoprene seals used in production equipment, with smaller factories producing tequila with the highest DEHP concentrations. The study provides actionable information for the tequila industry to reduce chemical contamination by identifying specific equipment-related sources.
The purpose of this study was to determine the origin, presence, and fate of the endocrine disruptor di-ethylhexil phthalate (DEHP) during tequila production. For this, three tequila factories (small, medium, and large) were monitored. DEHP concentrations in water, agave, additives, lubricating greases, neoprene seals, and materials of each stage process were analyzed using gas chromatography/mass spectrometry. DEHP mass balances were performed to identify the processes with significant changes in the inputs/outputs. DEHP was detected in agave at up to 0.08 ± 0.03 mg kg-1, water 0.02 ± 0.01 mg kg-1, lubricant greases 131.05 ± 2.80 mg kg-1, and neoprene seals 369.11 ± 22.52 mg kg-1. Whereas, tequila produced in the large, medium, and small factories contained 0.05 ± 0.01, 0.24 ± 0.04, and 1.43 ± 0.48 mg kg-1 DEHP, respectively. Furthermore, in waste materials (vinasses and bagasse) released, 534.26 ± 349.02, 947.18 ± 65.84, and 5222.60 ± 2836.94 mg of DEHP was detected for every 1000 L of tequila produced. The most significant increase in DEHP occurred during the sugar extraction and distillation stages. Results demonstrate that main raw materials, such as agave and water, contain DEHP, but lubricant greases and neoprene seals are the major sources of DEHP contamination. Identification of the contamination sources can help the tequila industry to take actions to reduce it, protect consumer health and the environment, and prevent circular contamination.
More Papers Like This
Occurrence and distribution of microplastic particles and the concentration of Di 2-ethyl hexyl phthalate (DEHP) in microplastics and wastewater in the wastewater treatment plant
AI summary Read the abstract
Researchers investigated the presence and fate of microplastics during the wastewater treatment process, along with the plasticizer DEHP associated with them. They found that while treatment stages reduced microplastic numbers, the particles persisted throughout the process, and DEHP was detected in both the microplastics and surrounding wastewater. The study suggests that wastewater treatment plants are a significant pathway through which microplastics and associated chemicals enter the environment.
Assessment of endocrine-disrupting activities of alternative chemicals for bis(2-ethylhexyl)phthalate
AI summary Read the abstract
Researchers assessed the endocrine-disrupting potential of alternative plasticizers used to replace the commonly restricted DEHP (bis(2-ethylhexyl) phthalate), finding that several substitutes also displayed hormonal activity. The results raise concerns that some replacement plasticizers used in consumer plastics may carry similar health risks as the chemicals they were designed to replace.
Leaching of di-2-ethylhexyl phthalate from biodegradable and conventional microplastics and the potential risks
AI summary Read the abstract
Researchers compared the leaching of the plasticizer DEHP from biodegradable and conventional microplastics into seawater. They found that conventional polyethylene mulch film released the most DEHP, at about six times the amount leached from biodegradable alternatives. The study suggests that while all tested microplastics released some DEHP, the pollution risk from the leached amounts was assessed as low based on phthalate pollution indices.
Monitoring of polymer type and plastic additives in coating film of beer cans from 16 countries
AI summary Read the abstract
Researchers analyzed the plastic coating films inside and outside beer cans from 16 countries and found that epoxy resin was the dominant polymer used, along with chemical additives like DEHP and BHT at concentrations up to thousands of nanograms per gram. Environmental samples of degraded metal cans showed one to two orders of magnitude higher additive concentrations than new cans, suggesting corroded metal packaging becomes a significant source of plastic-associated chemical pollution.
Di-(2-ethylhexyl) phthalate and its Metabolites Research Trend: A Bibliometric Analysis
AI summary Read the abstract
This bibliometric analysis maps 47 years of research into DEHP, a plasticizer widely used in PVC plastics, identifying its endocrine-disrupting and reproductive effects as major concerns and noting that microplastics are an emerging research trend in this field. DEHP is relevant to microplastic health risks because plastic particles can carry DEHP as a chemical contaminant, releasing it into the body upon ingestion or inhalation.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.