0
Article Tier 2 Nanoplastics Sign in to save

Poly(lactic acid)/ poly(ε-caprolactone) blends: the effect of nanocalcium carbonate and glycidyl methacrylate on miscibility

2024

AI summary Read the abstract

Researchers investigated the effect of adding glycidyl methacrylate and nano calcium carbonate to poly(lactic acid)/poly(epsilon-caprolactone) blends, finding that both additives improved interfacial adhesion and mechanical properties of the otherwise poorly miscible PLA/PCL system.

Polymers

Abstract To expand the potential applications of polylactic acid (PLA), it is essential to incorporate a highly flexible polymer into the blend. Polycaprolactone (PCL) is an ideal choice due to its ductility and biodegradability. However, blending PLA with PCL results in weak mechanical properties. To address this issue, glycidyl methacrylate (GMA) and nano calcium carbonate (NCC) were introduced to enhance the adhesion at the interface between PLA and PCL. SEM images provided clear visual evidence of the impact of GMA and NCC on the morphology of the blend. Both components were effective in reducing the size of the dispersed PCL phase, shrinking it to approximately half the size of the original blend. Spectroscopic analysis revealed that GMA caused a reaction between its epoxy group and the hydroxyl and carboxyl groups of PLA and PCL. This reaction led to the formation of strong peaks in the 6.5 to 7.5 range in 1H NMR, as well as peaks at 76 and 139 ppm in 13C NMR. These findings were further corroborated by FT-IR, which demonstrated that NCC, despite its surface coating, did not create any new bonds. Rheological studies further demonstrated the positive effects of GMA and NCC. Both the storage modulus (G') and complex viscosity (η*) of the blends increased, showing improved post-processing performance. Investigation into the shear-thinning behavior of the uncompatibilized blends revealed that NCC caused a significant decrease in complex viscosity at higher frequencies, indicating the disruption of the nanoparticle network. The power-law slope was measured to be 0.62. In contrast, the blend containing the compatibilizer demonstrated a moderate decrease in viscosity, with a power-law slope of 0.36. To analyze the behavior of the PLA/PCL blends in the presence of compatibilizers and nanoparticles at intermediate frequencies, the Palirene model was utilized. The superior integrity of the compatibilized blend was effectively demonstrated by the model, which showed enhanced stress transfer and phase relaxation.

More Papers Like This

Article Tier 2

Hybrid Green Materials Obtained by PCL Melt Blending with Diatomaceous Earth

AI summary Read the abstract

Researchers blended diatomaceous earth with polycaprolactone (PCL) to create composite green materials, finding that the addition of the natural mineral filler improved viscoelastic and thermal properties of the biodegradable polymer matrix.

Article Tier 2

Properties and application of PLA/mung bean starch composites: Effect of the soft segment molecular weight of PCL-based polyurethane prepolymer

AI summary Read the abstract

Researchers synthesized polycaprolactone-based polyurethane prepolymers as compatibilizers for PLA/mung bean starch biocomposites, finding that lower-molecular-weight prepolymers produced stronger chemical cross-linking at the polymer interface, yielding a 27% increase in tensile strength and 163% improvement in elongation at break.

Article Tier 2

Ligno-cellulose fibre poly(lactic acid) interfaces in biocomposites

AI summary Read the abstract

This research examined the interfaces between ligno-cellulose fibres and poly(lactic acid) (PLA) in biocomposites, focusing on improving compatibility to produce durable yet biodegradable thermoplastic composites based on renewable raw materials. The study explored methods to enhance fiber-matrix adhesion to optimize mechanical performance.

Article Tier 2

Advance in Nanoplastics Made by Intercalation Compounding Method

AI summary Read the abstract

This paper reviews intercalation compounding methods for manufacturing polymer-clay nanocomposites (nanoplastics), noting their improved mechanical, thermal, and barrier properties compared to conventional plastics — relevant context for understanding how nanoplastics are engineered and potentially released into the environment.

Article Tier 2

Improvement in the toughness and compatibility of poly(lactic acid)/starch acetoacetate through reactive melt-kneading with amine-modified silicone

AI summary Read the abstract

Not relevant to microplastics — this paper improves the toughness and compatibility of polylactic acid/starch blends using amine-modified silicone as a compatibilizer, aiming to expand biodegradable plastic use in packaging and single-use products.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper