0
Article Tier 2 Detection Methods Environmental Sources Food & Water Gut & Microbiome Human Health Effects Marine & Wildlife Remediation Sign in to save

Identification, characterization and the removal of Microplastic, a persistent neo-contaminant from Dairy Waste Water Treatment Plant (WWTP)

2024

AI summary Read the abstract

This study characterized microplastic contamination in a dairy industry wastewater treatment plant, identifying size, shape, and polymer composition of microplastics at various treatment stages and evaluating the plant's overall removal efficiency.

Study Type Environmental

Plastic debris of size < 5mm are considered as microplastics and are serious concern in the present world due to its persistent nature and ubiquitousness in every spheres of the environment. Waste Water Treatment Plants (WWTP) are one of the main point sources of microplastic to the environment. The primary objective of this study was to identify and characterize microplastics present in wastewater from the dairy industry and to suggest effective management practices for their efficient removal before the effluent is discharged into the environment. The samples were collected from the influents to the WWTP, Aeration-tank, Clarifier, Final-effluent and sludge. The microplastic extraction were done by digestion (30%-H2O2) and density separation (NaCl and NaI) method. Micro-Raman spectroscopy, SEM and SEM-EDS techniques were used for the identification and characterization of microplastics. The findings indicated that the sludge from the WWTP contained a significantly higher particle count (2560 particles/g) compared to the water samples (38 particles/L). Microplastics of different shapes were identified in the study, its abundance is in the following order: fragments>films/sheets>pellets> foam. The size of microplastics ranges from 20µm to 2500 µm and the highest abundance observed in the range between 100-500 µm. Most of the microplastics were transparent (46.87 %), white (31.26%) and blue (15.62%) in color. Seven different varieties of microplastic such as Polyamide, Polyethylene, Poly-vinyl-chloride, Polypropylene, Low-density-polyethylene, Polyurethanes, Nylon were identified. Polyethylene is the predominant microplastic found in all the samples (62.49%) followed by Polypropylene (11.72%) and Poly-vinyl-chloride (9.37%) respectively. Polyurethane (7.81%) and Nylon (3.9%) were found only in sludge samples. SEM images showed cracks, pores (480 nm to 998 nm), fractures on the surface and are prone to breakdown. Some of the microplastics exhibit signs of being colonized by microorganisms or particle-like structures within cracks, signifying the presence of high surface area. It would increase the chance to attach contaminants, resistant microbes and other pollutants to microplastic when discharged/exposed to more complex environment and elevate its toxicity. SEM-EDS analysis shows microplastics association with metals (Mg, Al, Na, Si, Ca, Fe, Pd). The economical and expeditious solution for microplastic removal is to improve, the current treatment process instead of finding a new method. Some recommendations to enhance the removal of microplastics include lengthening the retention time in the sedimentation/skimming processes, altering the materials in the filtration-units, and improving the flocculation/coagulation methods. For example, aluminum-based coagulant is more effective in eliminating microplastic than Fe and polyacrylamide-based coagulant to reduce, comparatively high microplastics content in the influent and aeration-tank. The extraction of microplastic in fat-trap stage using grease and subsequent pyrolysis prevents larger particles to enter the system and helping to curb the elevated concentration of microplastic in sludge. Co-pyrolysis with biomass and hydrothermal reactions can also be adopted. Recommendations for efficient microplastics management practices were also proposed.

More Papers Like This

Article

Micro plastics in Waste Water Treatment Plants: Detection, Occurrence, and Removal

AI summary Read the abstract

This review summarizes current knowledge on microplastic sources, occurrence, removal efficiency, and potential consequences in wastewater treatment plants. The authors identify significant knowledge gaps regarding microplastic impacts on treatment processes and the environment, highlighting the need for further research to fully understand and mitigate this emerging concern.

Article Tier 2

Characterization and Removal of Microplastics in Different Stages of Wastewater Treatment Plants

AI summary Read the abstract

This review examines the types, shapes, and sizes of microplastics found in domestic and industrial wastewaters and evaluates the removal efficiency of different treatment processes across wastewater treatment plant stages, noting that no existing process achieves 100% removal.

Article Tier 2

Microplastics in Wastewater Treatment Plants (WWTPs): A Review

AI summary Read the abstract

This review examines the occurrence and behavior of microplastics in wastewater treatment plants (WWTPs), finding that while WWTPs remove a large proportion of incoming microplastics, they still discharge significant quantities into receiving water bodies daily. The paper calls for improved treatment technologies and better characterization of microplastic types in wastewater streams.

Article Tier 2

Evaluation of microplastic load in a waste water treatment plant (WWTP)

AI summary Read the abstract

This student project evaluated microplastic loads at a wastewater treatment plant, finding that while high proportions are removed, effluent still contained significant microplastic concentrations. The research provides quantitative data on treatment plant performance for these emerging pollutants.

Article Tier 2

Study of occurrence, abundance, and characterization of microplastics in wastewater treatment plant in New Delhi, India

AI summary Read the abstract

Researchers quantified microplastic prevalence in influent, treated effluent, and sludge from a wastewater treatment plant in New Delhi, finding that MPs are present throughout the treatment process and that the plant incompletely removes them, discharging MPs into receiving waters.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper