We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Fate and behaviour of Microplastics (> 25µm) within the water distribution network, from water treatment works to service reservoirs and customer taps
AI summary Read the abstract
Researchers tracked microplastics larger than 25 micrometers through Britain's water distribution network from treatment plants to customer taps. The study found that while overall concentrations were low, certain polymer types like polypropylene and polyamide were more prevalent at customer taps than at treatment plant outlets, suggesting the distribution network itself may be a source of microplastic contamination.
Water treatment works have previously shown high efficiency in removing microplastics > 25 µm from raw source water. However, what is less well known is the extent to which microplastics of this size class are generated or lost within the water distribution network, particularly whether there is a greater presence in the customer tap than in the water treatment works outlet. This study focused on the presence of 21 different types of synthetic polymer particles with sizes larger than 25 µm examined through multiple rounds of sampling at outlets of water treatment works (WTW), service reservoirs (SR), and customer taps (CT) managed by seven different water companies in Britain. Nineteen different types of polymers were detected; their signature and concentration varied based on the round of sampling, the location within the water supply network, and the water company responsible for managing the supply. Among the polymers examined, polyamide (PA), polyethene terephthalate (PET), polypropylene (PP), and polystyrene (PS) were the most commonly found. Apart from PET having its highest concentration of 0.0189 microplastic per litre (MP/L) in the SR, the concentrations of the other three most frequent polymers (PS = 0.017 MP/L, PA = 0.0752 MP/L, PP= 0.1513 MP/L) were highest in the CT. The overall prevalence of this size of microplastics in the network is low, but there was a high variability of polymer types and occurrences. These spatial and temporal variations suggested that the MP in the distribution network may exist as a series of pulses. Given the presence and polymer types, the potential for some of the microplastics to originate from materials used in the water network and domestic plumbing systems cannot be ruled out. As found before, the absolute number of microplastics in the water distribution network remained extremely low.
More Papers Like This
Microplastics throughout a tap water supply network
AI summary Read the abstract
Researchers evaluated microplastic presence throughout a large tap water distribution network, detecting microplastics at multiple points from treatment plant to consumer taps and finding that concentrations increased along the distribution system, suggesting the pipe network itself as a contamination source.
Microplastics in drinking water distribution systems: Occurrence, environmental behavior, and human health concerns
AI summary Read the abstract
This review examines how microplastics move through drinking water distribution systems, from treatment plants all the way to household taps. Despite treatment efforts, microplastics persist in the water supply, with plastic pipes and fittings themselves contributing additional contamination. The tiny particles also serve as carriers for harmful bacteria and other pollutants, compounding the health risks of microplastic-contaminated drinking water.
Microplastics in drinking water. Efficiency of treatment and distribution of a drinking water cycle
AI summary Read the abstract
Researchers tracked microplastics through an entire drinking water cycle — from reservoir to treatment plant to distribution network — and found that conventional treatment removed about 92% of microplastics, but particle counts rose again in storage tanks and pipes, likely from material wear. The study highlights that even effective treatment plants can be undermined by the distribution infrastructure downstream.
Identification and Quantification of Microplastics in Potable Water and Their Sources within Water Treatment Works in England and Wales
AI summary Read the abstract
Researchers tested eight water treatment works in England and Wales and found that conventional treatment processes removed 99.99% of microplastics, reducing raw water concentrations of about 5 particles per liter to near-zero in drinking water. Polyethylene, PET, and polypropylene were the most common polymers found in the raw water supply.
Abundance and characteristics of microplastics in drinking water treatment plants, distribution systems, water from refill kiosks, tap waters and bottled waters
AI summary Read the abstract
This review summarizes research on microplastic contamination across the entire drinking water supply chain, from treatment plants to tap water and bottled water. Microplastics were found at every stage, with concentrations varying widely depending on location and treatment methods. The findings highlight that people are regularly consuming microplastics through their drinking water, though more standardized research is needed to fully understand the health implications.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.