We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Measurement and Analysis of Brake and Tyre Particle Emissions from Automotive Series Components for High-Load Driving Tests on a Wheel and Suspension Test Bed
Summary
This is not primarily about microplastics — it is a vehicle emissions study measuring brake and tyre particle emissions (size distribution, mass, and composition) under high-load driving conditions on a test bed, focused on aerosol characterization and non-exhaust emissions regulation.
A current challenge in realising clean road transport is non-exhaust emissions. Important advances regarding measurement systems, including well-defined characterisation techniques, as well as regulation, will be made in the next few years. In this work, we present the detailed results of particle emission analyses, consisting of aerosol (size distribution, particle number (PN), and mass (PM)) and electron microscopy (EM) measurements, under different load conditions on a test bed for a wheel suspension and brakes. Standard tyres and brakes from serial production were tested with a high-load driving cycle, while particle measurements were conducted by gravimetric measurements and with a TSI SMPS, a TSI APS, and a GRIMM OPS. Furthermore, samples were analysed by electron microscopy. A bimodal particle size distribution (PSD) was obtained with an SMPS, with peaks at 20 nm and around 400 nm. The results of an EM analysis of >1400 single particles from the electrostatic sampler match the PSD results. The EM analysis also showed ultrafine particles, mainly containing O, Fe, Si, Ba, Mg, and S, and also fractal particles with high-C fractions. Our results suggest, in agreement with the previously published literature, that particulate emissions are related to the brake disc temperature and occur in significant amounts above a threshold temperature.
Sign in to start a discussion.
More Papers Like This
Particle Emissions and Disc Temperature Profiles from a Commercial Brake System Tested on a Dynamometer under Real-World Cycles
This engineering study characterized the particle emissions from a commercial vehicle brake system during realistic driving cycles, measuring how particle size and composition change under different braking conditions. Brake wear particles are a significant source of microplastic and heavy metal pollution in urban environments.
Characteristics of Real-World Non-Exhaust Particulates from Vehicles
This study characterized non-exhaust particulate emissions from vehicles including brake wear, tire wear, and road surface particles, examining their size distributions, chemical composition, and toxicity potential. The results support calls for regulatory frameworks that extend beyond tailpipe emissions to address the full spectrum of vehicle-derived pollution.
On-Road Vehicle Measurement of Tire Wear Particle Emissions and Approach for Emission Prediction
An instrumented measurement vehicle was developed to quantify tire wear particle emissions under real-world on-road conditions, identifying key driving parameters such as speed, load, and cornering that govern emission rates. The study supports the development of emission factors and regulatory standards for non-exhaust tire-derived microplastic pollution.
Analytical Investigation of Tire Induced Particle Emissions
This automotive engineering study measured the size distribution of fine dust particles (under 10 micrometers) generated by tire wear, finding that tire-derived particles represent a significant non-exhaust source of urban particulate matter. As electric vehicle adoption reduces exhaust emissions, tire and brake wear particles will become a proportionally larger component of urban air pollution. These tire wear particles are also a major source of microplastic contamination in road runoff.
Characteristics of Real-world Non-exhaust Particulates from Vehicles
Researchers characterized non-exhaust particulate emissions from vehicle tire and road wear, collecting atmospheric PM samples with a high-volume quartz filter sampler and using pyrolysis-GC/MS to analyze tire rubber markers including polycyclic aromatic hydrocarbons and heavy metals, quantifying the contribution of tire-brake-road wear particles to urban air pollution.