0
Article Tier 2 Nanoplastics Sign in to save

A powerful method for In Situ and rapid detection of trace nanoplastics in water—Mie scattering

Journal of Hazardous Materials 2024 13 citations

AI summary Read the abstract

Scientists developed a fast, on-site method for detecting nanoplastics in water using Mie scattering, a light-based technique that can identify polystyrene particles as small as 25 nanometers. When tested on commercial bottled water, nanoplastic concentrations of 0.07 to 0.39 micrograms per liter were found across five brands. This type of rapid detection tool is important for real-time monitoring of nanoplastic contamination in drinking water and assessing potential human health risks.

Polymers

The pervasive presence of nanoplastics (NPs) in environmental media has raised significant concerns regarding their implications for environmental safety and human health. However, owing to their tiny size and low level in the environment, there is still a lack of effective methods for measuring the amount of NPs. Leveraging the principles of Mie scattering, a novel approach for rapid in situ quantitative detection of small NPs in low concentrations in water has been developed. A limit of detection of 4.2 μg/L for in situ quantitative detection of polystyrene microspheres as small as 25 nm was achieved, and satisfactory recoveries and relative standard deviations were obtained. The results of three self-ground NPs showed that the method can quantitatively detect the concentration of NPs in a mixture of different particle sizes. The satisfactory recoveries (82.4% to 110.3%) of the self-ground NPs verified the good anti-interference ability of the method. The total concentrations of the NPs in the five brands of commercial bottled water were 0.07 to 0.39 μg/L, which were directly detected by the method. The proposed method presents a potential approach for conducting in situ and real-time environmental risk assessments of NPs on human and ecosystem health in actual water environments.

More Papers Like This

Article Tier 2

Direct Detection of Polystyrene Nanoplastics in Water Using High-sensitivity Surface-enhanced Raman Scattering with Ag Nanoarray Substrates

AI summary Read the abstract

Researchers developed a fast, sensitive detection method using silver nanostructures and laser light scattering (surface-enhanced Raman scattering) to identify polystyrene nanoplastics in water at concentrations as low as 10 micrograms per milliliter, offering a practical tool for monitoring nanoplastic contamination in real-world water sources.

Article Tier 2

Continuous Sizing and Identification of Microplastics in Water

AI summary Read the abstract

Researchers developed a proof-of-concept method for simultaneously determining the size and material type of microplastic particles in water using combined elastic and inelastic light scattering. The technique pairs Mie scattering for sizing with Raman scattering for material identification, enabling continuous characterization of microplastics in a single measurement step.

Article Tier 2

Quantitative and sensitive analysis of polystyrene nanoplastics down to 50 nm by surface-enhanced Raman spectroscopy in water

AI summary Read the abstract

Researchers developed a highly sensitive method using surface-enhanced Raman spectroscopy to detect and quantify polystyrene nanoplastics as small as 50 nanometers in water samples. The technique achieved detection limits far below what conventional methods can measure, enabling the identification of nanoplastics at environmentally relevant concentrations. This advancement addresses a critical gap in nanoplastic monitoring, as most existing methods cannot reliably detect particles at such small sizes.

Article Tier 2

Identification of polystyrene nanoplastics using surface enhanced Raman spectroscopy

AI summary Read the abstract

Researchers demonstrated for the first time that surface-enhanced Raman spectroscopy (SERS) using silver nanoparticles can identify polystyrene nanoplastics as small as 50 nm in real water samples, providing a rapid detection method that bypasses conventional sample preparation and could advance environmental monitoring of nanoplastics previously invisible to standard analytical techniques.

Article Tier 2

High sensitivity in quantitative analysis of mixed-size polystyrene micro/nanoplastics in one step

AI summary Read the abstract

Scientists developed a new method using filtration combined with surface-enhanced Raman spectroscopy to separate and identify mixed-size micro- and nanoplastics in a single step. The technique achieved detection limits as low as parts-per-billion concentration levels and was successfully tested in real-world tap water samples. Reliable methods for detecting nanoplastics in drinking water are crucial for understanding the extent of human exposure through water consumption.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper