We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Identification of different plastic types and natural materials from terrestrial environments using fluorescence lifetime imaging microscopy
Summary
Researchers tested a microscopy technique called fluorescence lifetime imaging (FD-FLIM) to quickly identify and distinguish microplastics from natural materials like soil particles, finding that a 445 nm light excitation was best for telling plastic types apart — potentially offering a faster alternative to slow, labor-intensive microplastic analysis methods.
Environmental pollution by plastics is a global issue of increasing concern. However, microplastic analysis in complex environmental matrices, such as soil samples, remains an analytical challenge. Destructive mass-based methods for microplastic analysis do not determine plastics' shape and size, which are essential parameters for reliable ecological risk assessment. By contrast, nondestructive particle-based methods produce such data but require elaborate, time-consuming sample preparation. Thus, time-efficient and reliable methods for microplastic analysis are needed. The present study explored the potential of frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) for rapidly and reliably identifying as well as differentiating plastics and natural materials from terrestrial environments. We investigated the fluorescence spectra of ten natural materials from terrestrial environments, tire wear particles, and eleven different transparent plastic granulates <5 mm to determine the optimal excitation wavelength for identification and differentiation via FD-FLIM under laboratory conditions. Our comparison of different excitation wavelengths showed that 445 nm excitation exhibited the highest fluorescence intensities. 445 nm excitation was also superior for identifying plastic types and distinguishing them from natural materials from terrestrial environments with a high probability using FD-FLIM. We could demonstrate that FD-FLIM analysis has the potential to contribute to a streamlined and time-efficient direct analysis of microplastic contamination. However, further investigations on size-, shape-, color-, and material-type detection limitations are necessary to evaluate if the direct identification of terrestrial environmental samples of relatively low complexity, such as a surface inspection soil, is possible.
Sign in to start a discussion.
More Papers Like This
A promising method for fast identification of microplastic particles in environmental samples: A pilot study using fluorescence lifetime imaging microscopy
Researchers piloted fluorescence lifetime imaging microscopy as a fast method for identifying microplastic particles in environmental samples. The study suggests this technique could simplify microplastic analysis by potentially eliminating the need for extensive extraction steps, enabling more direct identification of plastic particles in complex matrices.
A Rapid Method for Detecting Microplastics Based on Fluorescence Lifetime Imaging Technology (FLIM)
Researchers developed a rapid microplastic detection method using fluorescence lifetime imaging technology (FLIM) with phasor analysis. The study successfully identified four types of microplastics, both Nile red-stained and unstained, by their unique fluorescence lifetime signatures. The findings suggest that FLIM-based phasor analysis could provide a faster and more accurate approach for microplastic identification compared to conventional spectroscopic methods.
Frequency domain fluorescence lifetime imaging microscopy: A new method to directly identify microplastics in water.
Researchers evaluated frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) as a method to identify ABS, PC, PET, PS, and PVC granulates directly in a 1 cm water layer without filtration or drying. The study found that all five polymer types could be unambiguously identified by their fluorescence lifetimes, establishing FD-FLIM as a promising rapid label-free technique for direct microplastic detection in aqueous samples.
Label-free identification and differentiation of different microplastics using phasor analysis of fluorescence lifetime imaging microscopy (FLIM)-generated data
Researchers developed a label-free method using fluorescence lifetime imaging microscopy (FLIM) combined with phasor analysis to identify and differentiate multiple types of microplastics based on their unique fluorescence lifetime signatures, enabling more efficient microplastic characterization without chemical staining.
Detecting and monitoring the leaching of small (¡ 2 µm) microplastics in soils by fluorescence microscopy
Researchers developed a fluorescence microscopy method to detect and monitor the leaching of small microplastics (under 2 µm) in soils, comparing it against µ-Raman spectroscopy across matrices of varying complexity and demonstrating its applicability for tracking the smallest microplastic fraction in soil systems.