0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Detection Methods Environmental Sources Sign in to save

Convenient determination of polystyrene microplastics in soils by gel permeation chromatography-ultraviolet detection analysis

Journal of Hazardous Materials 2024 10 citations ? Citation count from OpenAlex, updated daily. May differ slightly from the publisher's own count. Score: 50 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
Huiru Li, Duohao Jiang, Yan Wang, Jinsong Liu, Kezhi Jiang

Summary

Researchers developed a practical method for detecting polystyrene microplastics in soil using gel permeation chromatography with ultraviolet detection after a simple acid-assisted extraction. The method achieved good recovery rates and low detection limits, making it accessible for routine soil monitoring without requiring expensive instrumentation. The study offers a convenient analytical tool for tracking polystyrene microplastic contamination in agricultural and environmental soils.

Polymers

Microplastics (MPs), especially polystyrene microplastics (PS-MPs), have emerged a new worldwide pollutant, prompting significant public concern regarding their detection in environmental media. Analysis of PS-MPs in soil remains as a challenging task for analysts due to the highly intricate matrices. This work presents a practical approach for detecting PS-MPs in soil, which involves dilute HCl-assisted extraction and gel permeation chromatography- ultraviolet detection (GPC-UV) analysis. The presence of MPs in soil was confirmed through the use of a scanning electron microscope in conjunction with energy dispersive spectroscopy investigation. PS-MPs was isolated from soil, by agitating it with a diluted HCl solution, filtering the resulting liquid, and dissolving the residue on the filter with THF. The extractant was subsequently determined by GPC-UV. The introduction of a small amount of HCl into the extraction system was found to greatly expedite the settling of soil in water and enhance the efficacy of extracting PS-MPs in about 30 min. The linear range of PS-MPs was from 1.0 to 100 μg/mL with R > 0.999. Good reproducibility was obtained with the intra-day relative standard deviation (RSD, n = 3) of 1.36 % and the inter-day RSD (n = 3) of 4.78 %. The concentration of PS-MPs in soil samples were N.D. - 2.33 μg/g, and the good recoveries were 76.7-100.3 %. The corresponding AFGEEprer score was calculated to be 0.59, indicating the concept of green analytical chemistry for the pretreatment method. These results indicated that this method has a powerful potential for the accurate and rapid determination of PS-MPs in soil.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Development and validation of simple UV-spectrophotometric method for the estimation of polystyrene plastic/microplastic

Researchers developed a simple UV spectrophotometry method to detect and quantify polystyrene microplastics in samples. Polystyrene is widely used in food packaging and can release styrene — a potential carcinogen — when in contact with hot or fatty foods, making reliable detection methods important for monitoring contamination.

Article Tier 2

Microplastic analysis using chemical extraction followed by LC-UV analysis: a straightforward approach to determine PET content in environmental samples

Researchers developed a straightforward method for microplastic analysis combining chemical extraction with LC-UV detection to determine PET content in environmental samples including sewage sludge and bio-waste applied to agricultural soils. The study demonstrated that this approach provides quantitative data on terrestrial microplastic contamination via a practical laboratory workflow.

Article Tier 2

Selective determination of poly(styrene) and polyolefin microplastics in sandy beach sediments by gel permeation chromatography coupled with fluorescence detection

A new analytical method using gel permeation chromatography with fluorescence detection was developed to identify polystyrene and polyolefin microplastics in beach sediment samples. This technique offers a selective and sensitive alternative to spectroscopy-based methods for detecting common plastic types in environmental samples.

Article Tier 2

Separate determination of polystyrene nanoplastics and microplastics in water by membrane filtration and gel permeation chromatography-ultraviolet detection analysis

Researchers developed a practical laboratory method to separately measure polystyrene nanoplastics and microplastics in water samples using membrane filtration and a specialized chromatography technique. The method was validated in both environmental water and tap water, confirming the presence of nanoplastics through multiple analytical approaches. This represents an important step forward in the ability to accurately distinguish between different sizes of plastic pollution in drinking and environmental water.

Article Tier 2

A novel and simple method for measuring nano/microplastic concentrations in soil using UV-Vis spectroscopy with optimal wavelength selection

Researchers developed a simple UV-Vis spectroscopy method for measuring nano- and microplastic concentrations in soil, using optimized wavelength combinations to account for interference from soil particles. The study demonstrated a linear relationship between spectroscopic measurements and actual plastic concentrations, offering a potentially practical tool for monitoring plastic contamination across different soil types.

Share this paper