Routine method for the analysis of microplastics in natural and drinking water by pyrolysis coupled to gas chromatography-mass spectrometry

The presence of microplastics (MPs) in water intended for human consumption represents a growing concern due to their ubiquity in the aquatic environments and the potential adverse effects on human health. In this context, validated and standardized analytical methods are required to minimize uncertainties associated with the determination of MPs in water, especially during the drinking water treatment process. In this study, a simple water sampling and extraction procedure and analysis using pyrolysis with gas chromatography coupled to mass spectrometry (Py-GC-MS) was developed to determine 7 types of polymers in water. Quality parameters associated with the method were evaluated, including limits of detection (MDL) and quantitation (MQL), linearity, precision, accuracy, and extended uncertainty. The developed methodology was validated by participating in the EUROQCHARM interlaboratory exercise, and the Z-scores were within the acceptable range for 4 of the 5 polymers tested. Finally, MPs were determined in river water, reclaimed water, and drinking water from the urban area of Barcelona and total concentrations ranged from 11.3 µg/L to 77.1 µg/L. The proposed methodology allows for simple (direct filtration of 100-500 mL of water with a 13 mm glass fiber filter), quantitative (µg/L), and rapid (with a total analysis time of 20 min per sample, including both pyrolysis and GC-MS) analysis of MPs in water intended for drinking.