We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Removal of Microplastics in a Hybrid Treatment Process of Ceramic Microfiltration and Photocatalyst-Mounted PES Spheres with Air Backwashing
Summary
Researchers developed a hybrid water treatment system combining ceramic microfiltration with photocatalyst-coated spheres and air backwashing to remove microplastics and organic matter. The combined system achieved higher removal rates for both microplastics and dissolved organic compounds than any single treatment method alone. The study demonstrates a promising approach for upgrading existing water treatment facilities to better handle microplastic contamination.
Microplastics (MPs), which are defined as plastics with a size of less than 5 mm, cannot be treated completely in wastewater treatment plants (WWTPs) and discharged to a water body because they are too small in size. It has been reported that MPs can have adverse effects on human beings and water ecosystems. There is a need to combine existing drinking water treatment plants (DWTPs) and WWTPs with the traditional treatment process and technology with high removal efficiency of MPs or to develop a new technology to separate MPs from water and wastewater. In this study, the effects of MPs (polyethylene (PE), 125 μm) and organic matter (humic acid) were researched in a hybrid treatment process of ceramic microfiltration (MF) and photocatalyst (TiO2)-mounted polyether sulfone (PES) spheres with air backwashing. The roles of the MF, photooxidation, and adsorption of PES spheres were confirmed in a single MF process (MF), an MF process with UV irradiation (MF+UV), MF and PES sphere adsorption without UV irradiation (MF+PES), and a hybrid process incorporating MF and PES spheres with UV irradiation (MF+PES+UV). The impact of the air backwashing cycle (filtration time, FT) on filtration characteristics and treatment efficiencies in the hybrid process was studied. In the MF process, membrane fouling increased with increasing organic matter (HA, humic acid). The treatment efficiency of MPs increased; however, that of dissolved organic matter (DOM) decreased with increasing HA. As MPs increased, the membrane fouling decreased; however, total filtration volume (VT) remained almost constant. The treatment efficiency of MPs increased a little, and that of DOM showed a dropping trend. In the hybrid process, the membrane fouling was controlled via the adsorption and UV photooxidation of the PES spheres, and the DOM treatment efficiency increased by combining processes from MF to MF+PES+UV. The optimal FT was 10 min at BT 10 s in this hybrid process. The results could be applied to separate MPs effectively in DWTPs/WWTPs.
Sign in to start a discussion.
More Papers Like This
Integration of Photocatalysis and Membrane Technology as a Hybrid System for Microplastic Degradation in Wastewater
Researchers evaluated a hybrid system combining TiO2 photocatalysis with membrane filtration for degrading microplastics in wastewater. The photocatalytic membrane reactor demonstrated effective removal and degradation of polyethylene, polypropylene, and PET microplastics, suggesting that integrated photocatalytic-membrane systems could improve microplastic removal beyond what conventional wastewater treatment achieves.
Photocatalytic and biological technologies for elimination of microplastics in water: Current status
This review examines emerging photocatalytic and biological technologies for breaking down microplastics in water, since conventional treatment facilities can capture but not fully destroy these particles. Researchers found that while photocatalysis and microbial degradation show promise, their effectiveness varies widely and the underlying mechanisms are only partly understood. The study highlights the urgent need for more efficient solutions to eliminate rather than simply filter out microplastic pollution from water supplies.
Effective Removal of Microplastics Using a Process of Ozonation Followed by Flocculation with Aluminum Sulfate and Polyacrylamide
Researchers tested a two-step water treatment process combining ozonation with flocculation to remove microplastics. They found that ozone pretreatment roughened the microplastic surfaces and added chemical groups that dramatically improved removal rates, from 40% to 91%, during the subsequent flocculation step. The findings suggest this combined approach could significantly enhance microplastic removal in conventional water treatment plants.
Application of Hybrid Ceramic Membranes for Microplastic and Nanoplastic Separation and Improved Wastewater Treatment
This study evaluated hybrid ceramic membrane filtration combined with anaerobic digestion for removing micro- and nanoplastics from wastewater. The system achieved high removal efficiencies and showed that membrane filtration is a promising technology for reducing plastic particles before effluent discharge.
Evaluation of a Water Treatment System for Removing Microplastic in an Aqueous Media
Researchers evaluated the microplastic removal efficiency of a hybrid water treatment system combining a Bradley-type hydrocyclone, sand filter, and polymeric microfiltration membrane, applying mass balance equations and solid-liquid separation models to determine removal performance across different MP size fractions.