We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Treatment of Synthetic Wastewater Containing Polystyrene (PS) Nanoplastics by Membrane Bioreactor (MBR): Study of the Effects on Microbial Community and Membrane Fouling
Summary
This study treated synthetic wastewater containing polystyrene nanoplastics using membrane bioreactor technology, evaluating removal efficiency across operational conditions and examining how nanoplastics affect biological treatment performance.
The persistent presence of micro- and nanoplastics (MNPs) in aquatic environments, particularly via effluents from wastewater treatment plants (WWTPs), poses significant ecological risks. This study investigated the removal efficiency of polystyrene nanoplastics (PS-NPs) using a lab-scale aerobic membrane bioreactor (aMBR) equipped with different membrane types: microfiltration (MF), commercial ultrafiltration (c-UF), and recycled ultrafiltration (r-UF) membranes. Performance was assessed using synthetic urban wastewater spiked with PS-NPs, focusing on membrane efficiency, fouling behavior, and microbial community shifts. All aMBR systems achieved high organic matter removal, exceeding a 97% COD reduction in both the control and PS-exposed reactors. While low concentrations of PS-NPs did not significantly impact the sludge settleability or soluble microbial products initially, a higher accumulation increased the carbohydrate concentrations, indicating a protective bacterial response. The microbial community composition also adapted over time under polystyrene stress. All membrane types exhibited substantial NP removal; however, the presence of nano-sized PS particles negatively affected the membrane performance, enhancing the fouling phenomena and increasing transmembrane pressure. Despite this, the r-UF membrane demonstrated comparable efficiency to c-UF, suggesting its potential for sustainable applications. Advanced characterization techniques including pyrolysis gas chromatography/mass spectrometry (Py-GC/MS) were employed for NP detection and quantification.
Sign in to start a discussion.
More Papers Like This
Effects of microplastics accumulation on performance of membrane bioreactor for wastewater treatment
Researchers simulated the long-term accumulation of polypropylene microplastics in membrane bioreactors used for wastewater treatment. They found that while microplastic accumulation did not reduce the removal of key pollutants like COD and ammonia nitrogen, it did increase membrane fouling and alter the composition of microbial communities in the reactor. The study suggests that microplastic buildup in wastewater treatment systems may affect operational efficiency over time.
Fouling behavior of nano/microplastics and COD, TOC, and TN removal in MBR: A comparative study
This study tested a membrane bioreactor (MBR) — a combination of biological treatment and membrane filtration used in wastewater plants — for its ability to remove nano- and microplastics from wastewater. The system achieved 99.4% removal of organic pollutants and complete removal of nanoplastics, and found that more hydrophilic membranes were better at capturing microplastics. The study also examined how microplastics foul and clog membranes over time, which is a practical challenge for wastewater treatment operations. These results support MBRs as a promising technology for reducing microplastic discharges from treatment plants into waterways.
Effect of polypropylene microplastics on the performance of membrane bioreactors in wastewater treatment
Researchers studied how polypropylene microplastics affect membrane bioreactors, a type of wastewater treatment system. They found that while these systems can effectively filter out microplastics, higher concentrations and smaller particle sizes caused membrane clogging and reduced treatment efficiency over time, which is important for designing better wastewater treatment facilities.
Responses of syntrophic microbial communities and their interactions with polystyrene nanoplastics in a microbial electrolysis cell
Researchers investigated how polystyrene nanoplastics affect microbial communities in a microbial electrolysis cell, a technology used for energy recovery during wastewater treatment. They found that nanoplastics disrupted the biofilm structure and altered the composition of the microbial communities responsible for breaking down waste. The study suggests that nanoplastic contamination in wastewater could reduce the efficiency of these promising electrochemical treatment systems.
Exploring the effects of polyethylene and polyester microplastics on biofilm formation, membrane Fouling, and microbial communities in Modified Ludzack-Ettinger-Reciprocation membrane bioreactors
Researchers investigated how polyethylene pellets and polyester fibers affect membrane bioreactor performance in wastewater treatment. They found that PE pellets increased membrane fouling rates 2-3 times faster, while polyester fibers reduced nitrate removal efficiency from 99.6% to 90.9% and decreased beneficial denitrifying bacteria. The study also found that microplastics in treatment systems can harbor pathogens and alter microbial community structures.