We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Enhancement of per- and Polyfluoroalkyl Substances (PFAS) quantification on surface waters from marinas in the douro river, Portugal
AI summary Read the abstract
This study developed an enhanced method for quantifying per- and polyfluoroalkyl substances on surfaces using analytical chemistry techniques, improving detection sensitivity and enabling more accurate assessment of PFAS contamination on environmental substrates.
PFAS, known as "forever" compounds, are prevalent in various environments, including soils and aquatic systems, due to extensive usage. Surface waters in several European countries, especially marinas and ports with high boat traffic, require further study as potential contamination sources. Reliable methods for the extraction and quantification of these emergent compounds are essential. This study aimed to improve an existent solid phase extraction method to analyse marinas and ports' surface waters with variable salinities (2, 9 and 17 PSU). The objectives were to: 1) optimise the solid phase extraction method, considering matrix salinity effects and cross-contaminations, 2) validate the extraction and quantification method of 18 EPA 537.1 PFAS in estuarine surface waters, using the Ultra-High Performance Liquid Chromatography - Quadrupole Time - Of - Flight - Tandem Mass spectrometry, and 3) apply the optimised method for PFAS quantification in three Portuguese marinas. All ICH criteria were successfully validated considering 9 PSU. Limits of quantification ranged from 117.80 ng/L to 385 ng/L, except for PFHpA (645.85 ng/L). PFAS levels (PFOA, HFPO-DA, PFBS, PFHxS and PFOS) were relatively low, reaching a maximum of 0.32 ng/L only for the PFOA. In Freixo marina, total average concentrations were slightly higher (∑PFAS = 1.02 ng/L) when compared to the ones found in Cais da Ribeira Port (∑PFAS = 0.94 ng/L) and Afurada marina (∑PFAS = 0.81 ng/L). PFOS concentrations are below the limit values set by the Environmental Quality Standards (36000 ng/L of PFOS for inland surface water, respectively), similar to other Portuguese river studies. This study enabled the development of a precise and reliable extraction and quantification method to quantify PFAS in estuarine surface waters, particularly from marinas. This method can be readily applied to analyse PFAS in other estuarine samples.
More Papers Like This
Poly- and per-fluoroalkyl substances in water: Occurrence, analytical methodologies, and remediations strategies: A comprehensive review
AI summary Read the abstract
This review comprehensively compiled information on per- and polyfluoroalkyl substances (PFAS) in water, covering their sources, health effects, analytical detection methods, and remediation strategies for removing these persistent contaminants from aquatic environments.
Detection and Tertiary Treatment Technologies of Poly-and Perfluoroalkyl Substances in Wastewater Treatment Plants
AI summary Read the abstract
This review examines detection methods and tertiary treatment technologies for removing poly- and perfluoroalkyl substances (PFAS) from wastewater, highlighting their environmental persistence, bioaccumulation potential, and adverse effects on ecosystems and human health.
Occurrence and abundance of poly- and perfluoroalkyl substances (PFASs) on microplastics (MPs) in Pearl River Estuary (PRE) region: Spatial and temporal variations
AI summary Read the abstract
Researchers collected microplastics from eight rivers in the Pearl River Estuary region of China across seasons and measured concentrations of poly- and perfluoroalkyl substances (PFAS) on their surfaces, finding that MP-bound PFAS concentrations varied by season and river and that MPs may be an overlooked pathway for PFAS transport in aquatic systems.
Recent Advancement and Understanding on the “Forever Chemicals”, PFAS in Drinking Water
AI summary Read the abstract
This review surveys current analytical detection methods and treatment technologies for PFAS "forever chemicals" in drinking water, highlighting limitations including matrix interference and inconsistent recovery rates, while calling for standardized protocols and innovative removal solutions to better protect public health from these persistent pollutants.
PFAS in Drinking Water: Risk Factor for Human Life, Modern Sources of Pollution, Methods of Control and Approaches to Water Purification (review)
AI summary Read the abstract
A comprehensive review of PFAS contamination in drinking water sources documents their widespread detection in rivers, groundwater, soils, and even military ammunition, highlighting carcinogenic, immunotoxic, endocrine-disrupting, and organ-damaging properties alongside the limitations of current detection and removal methods. This is directly relevant to microplastic research because PFAS chemicals are key components of many plastic formulations and readily adsorb to microplastic surfaces, making microplastics a vector for PFAS co-exposure via drinking water.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.