We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
The interaction of two emerging pollutants, radionuclides and microplastics: In-depth thermodynamic studies in water, seawater, and wastewater
Summary
Laboratory experiments measured how polyurethane and polylactic acid microplastics adsorb radioactive uranium and americium from water under conditions mimicking seawater and wastewater. The results show that microplastics can accumulate radionuclides from contaminated water environments, raising the possibility that plastic particles could act as unexpected carriers of radioactive contamination through aquatic food webs.
Microplastics and radionuclides create considerable obstacles for the sustainable management of aquatic systems. The interactions between uranium-232 and americium-241 with two microplastics, specifically polyurethane (PU) and polylactic acid (PLA), have been explored in aqueous matrixes mimicking seawater and wastewater. The tests were performed at different pH levels (4, 7, 9) and the remediation efficiency was evaluated predominately as a function of temperature. An increase in temperature positively influences the sorption of uranium and americium. The highest removal performance for both uranium and americium was observed in the neutral (log(K d ) PLA =1.6 and log(K d ) PU =1.7 for U; log(K d ) PLA =1.7 and log(K d ) PU =1.6 for Am) and alkaline (log(K d ) PLA =1.4 and log(K d ) PU =1.3 for U; log(K d ) PLA =1.8 and log(K d ) PU =1.9 for Am) pH ranges, respectively. In seawater mimicking water samples (pH ∼8), the adsorption efficiency declines significantly (log(K d ) PLA =1.1 and log(K d ) PU =1.2 for U; log(K d ) PLA =1.3 and log(K d ) PU =1.4 for Am) due to competitive interactions arisen from other metals/ions found in natural waters (e.g., Ca 2+ ) and the stabilization of actinides (particularly uranium) in solution (e.g., UO 2 (CO 3 ) 3 4- ). The composition of the water matrixes, which govern both actinide speciation and the types of surface-active sites, is strongly linked to the thermodynamics of surface adsorption and determines the values of the associated parameters (ΔΗ° and ΔS°). Generally, the ΔS° and ΔΗ° values were found positive, indicating that the interactions are entropy-driven. However, in the case sorption of U(VI) in seawater samples by PLA, both ΔS° and ΔΗ° became negative, denoting enthalpy-driven binding mechanisms associated with a decrease in randomness on the MP’s surface upon adsorption. • The interactions of PU and PLA microplastics with radionuclides were analyzed. • Increasing temperature favors the adsorption in the whole pH range independently water composition. • The adsorption is generally an endothermic reaction and entropy-driven process. • The highest adsorption is observed in the near-neutral pH range.
Sign in to start a discussion.