We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Microplastic contamination in Czech drinking water: insights from comprehensive monitoring
AI summary Read the abstract
Researchers analyzed drinking water from public supply systems across the Czech Republic and found microplastics in nearly all samples, with concentrations ranging from 20 to 180 particles per liter. The most common types were polyethylene-coated paper, PET, and polyester, appearing as both fibers and fragments. The estimated daily intake of microplastics through drinking water was approximately 2 particles per kilogram of body weight per day, though all results fell under European food safety thresholds.
Abstract The growth of global plastic production and the associated increase in microplastic pollution in the environment has attracted increasing attention from both scientists and the general public. Drinking water from public water supply systems is essential for human life and therefore ensuring its high quality is a priority. The aim of this study was to detect and identify microplastics in drinking water from public water supply systems. Water samples were collected from various locations across the Czech Republic during two sampling campaigns in 2021 and 2023. A total of 58 samples and 580 particles were analyzed using μ-FTIR (micro-Fourier-transform infrared spectroscopy). These particles were categorized by material, shape, color, and quantity. Of the analyzed particles, 196 were identified as microplastics. Except for one sample, where no microplastics were detected, the concentration ranged from 20 to 180 microplastics per liter during the first campaign and from 20 to 120 microplastics per liter in the second campaign. In the first campaign, fibers and transparent microplastics were predominantly detected, while in the second collection, fragments and blue microplastics were more common. The most frequently observed materials were paper with polyethylene coating, polyethylene terephthalate (PET), and polyester (PES). This study also provides data on the average daily intake of microplastics via drinking water, calculated as 2 and 2.1 MP/kg/day, with all results undergoing statistical evaluation. Furthermore, the study addresses new European legislation and the proposed standardized methodology, which represents a significant step toward achieving consistent results across studies and, upon its adoption, will likely influence the direction of research on microplastics in drinking water. However, as discussed in the study, the methodology contains several problematic aspects, which are elaborated upon. With the planned inclusion of microplastics on the EU list of substances to be monitored, it is essential to continue research and collect more data. This study confirms the presence of microplastics and provides detailed information on their characteristics in drinking water supplied by public water systems in the Czech Republic. Highlights Two drinking water sampling campaigns were carried out. Microplastics were found in 57 out of 58 analyzed drinking water samples. The average MP concentrations in two campaigns amounted 68.3 and 65 MP/L. Material, shape, and color of all detected microplastics were identified. Average daily MP intake via drinking water was calculated as 2 and 2.1 MP/kg/day. Graphical abstract
More Papers Like This
Microplastics in Drinking Water
AI summary Read the abstract
This study quantified microplastics from 0.2 micrometers in raw and treated water from three Czech water treatment plants, focusing on size fractions often overlooked in monitoring studies. Microplastic concentrations ranged from 1,414 to 7,006 particles per liter in raw water and 305 to 921 per liter after treatment, with particles smaller than 10 micrometers being most abundant, demonstrating that treatment substantially reduced but did not eliminate microplastics.
Determining the Presence of Micro-Particles in Drinking Water in the Czech Republic—An Exploratory Study Focusing on Microplastics and Additives
AI summary Read the abstract
Czech researchers analyzed drinking water samples using micro-FTIR spectroscopy and found microplastics as well as plastic additives in tap water collected from two locations. The 40-particle analysis confirms that microplastic contamination has reached Czech drinking water supplies and raises public health questions that the authors say require further investigation and regulatory consideration.
Occurrence and identification of microplastics in tap water from China
AI summary Read the abstract
Researchers analyzed 38 tap water samples from cities across China and found microplastics in all of them, with concentrations averaging around 440 particles per liter. Most particles were smaller than 50 micrometers, and the dominant types were polyethylene and polypropylene fragments. The findings highlight that drinking water treatment plants face a significant challenge in addressing microplastic contamination in the water supply.
Detection of microplastics in water sources and drinking water at the water treatment plants Káraný, Želivka and Podolí
AI summary Read the abstract
This study analyzed raw and treated water samples from three water treatment plants supplying Prague with drinking water for microplastic particle content and composition. The results characterize microplastic occurrence across different water treatment stages at these facilities.
Prevalence and implications of microplastics in potable water system: An update
AI summary Read the abstract
This review summarizes current knowledge on microplastic contamination in drinking water systems worldwide, covering sources, detection methods, and potential health implications. Researchers found that microplastics are present in both tap and bottled water, with fibers and fragments being the most common types detected. The study highlights the need for standardized testing methods and regulatory limits to protect public health from microplastic exposure through drinking water.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.