We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Tribological Performance of Short Fibers Reinforced Thermoplastic Polyurethane Composite Materials Under Water-Lubricated Condition
AI summary Read the abstract
This study evaluated the tribological performance of short fiber-reinforced thermoplastic polyurethane composites under water-lubricated conditions relevant to ship propulsion bearing systems. Ultra-high-molecular-weight polyethylene and carbon fibers significantly reduced friction and wear, improving bearing performance under low-speed, heavy-load conditions.
The water-lubricated bearing plays a crucial role in the ship propulsion system, significantly impacting vessel safety. However, under the harsh working conditions of low-speed and heavy-load, the lubrication state of water-lubricated bearings is usually poor, leading to serious friction and wear. To improve the tribological performance of composites and reduce friction, three short fibers (ultra-high-molecular-weight polyethylene fibers, basalt fibers, and bamboo fibers) with the same mass fraction (5%) were added into the melted thermoplastic polyurethane (TPU). The tribological behavior of these three composites under different loads and rotation speeds was investigated using the CBZ-1 friction and wear tester. Through the comprehensive analysis of the friction coefficient, the wear mass loss, and the surface morphology, it was confirmed that the filled fiber positively affected the tribological performance of thermoplastic polyurethane materials. The experimental results indicated that basalt fiber significantly improved the tribological performance of TPU, and the friction coefficient of the sample was only 0.088 under the working conditions of 0.5 MPa and 250 r/min, which was 70.57% lower than that of pure TPU material. And in all the tests, the minimum wear of the basalt fiber-reinforced composite is only 0.4 mg, which is also the smallest of all the materials under all conditions, and a decrease of 98.69% compared to TPU. Under high loads, ultra-high-molecular-weight polyethylene fiber and bamboo fiber-reinforced composites have smoother surfaces and exhibit better tribological properties. This study provides an experimental foundation for tribological performance enhancement for environmentally friendly, water-lubricated bearing composites.
More Papers Like This
Tribological Properties of Polyoxymethylene, Polyethylene Terephthalate and Polyetherimide Under Water-Lubricated Conditions
AI summary Read the abstract
Scientists tested three plastics as water-lubricated bearing materials (an eco-friendlier alternative to oil-based lubrication systems) and found that two of them, POM and PET, held up well with low friction and minimal wear, while a third, PEI, cracked and shed significant material under stress. This matters because PET—the same plastic used in water bottles—wore down through a fatigue-and-hydrolysis process, meaning water-lubricated bearings made from it could shed plastic particles into water systems over time, a relevant consideration as engineers weigh microplastic pollution against these bearings' environmental benefits over oil l
Physical and Mechanical Properties of Modified Continuous Basalt Fiber for the Production of Polymer Composite Materials: Experimental Study
AI summary Read the abstract
This engineering study tested a nanomodifier additive in lubricant formulations used during the production of composite polymer fibers. Adding the modifier at optimal concentrations improved the physical and mechanical properties of the resulting materials by 12-25%.
Thermoplastic polyurethane/graphene nanosheets composites with reduced microplastics release and enhanced mechanical properties
AI summary Read the abstract
Researchers incorporated graphene nanosheets into thermoplastic polyurethane (TPU) to create a composite material that releases significantly fewer microplastic particles during use. The graphene acts as a barrier, reducing microplastic shedding at the source while also improving mechanical strength.
Synthetic Lubricants Derived from Plastic Waste and their Tribological Performance
AI summary Read the abstract
Researchers converted pre- and post-consumer polyolefin plastic waste into high-quality synthetic lubricants, demonstrating tribological performance comparable to premium polyalphaolefin base oils and a 44% reduction in wear compared to petroleum-based Group III mineral oil. Life cycle and economic analyses confirmed the process is both energetically efficient and commercially viable, offering a novel pathway for plastic waste upcycling.
Eco-friendly sliding components - Friction and wear of selected biodegradable plastics
AI summary Read the abstract
Scientists tested nine biodegradable plastics to see if they could replace conventional plastics in mechanical parts like bearings and seals, everyday components found in appliances, vehicles, and machinery. Five of the plastics performed about as well as standard plastics in terms of durability and friction, suggesting they could help reduce plastic waste and microplastic pollution without sacrificing performance. This matters because swapping in biodegradable materials for hard-to-recycle plastic parts could shrink the mountain of plastic waste (and the microplastics it sheds) that eventually ends up in our environment, food, and bodies.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.