We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Performance of MOF-containing active layer and HOF-based support layer of ultrafiltration membrane for nanoplastics removal from secondary effluent
AI summary Read the abstract
Researchers built a novel ultrafiltration membrane using two advanced porous framework materials to filter nanoplastics out of real wastewater treatment plant effluent, successfully identifying and removing poly(methyl methacrylate), polyethylene, and polystyrene nanoparticles. The work addresses a critical gap because conventional wastewater treatment does not reliably remove nanoplastics before treated water is discharged.
Nanoplastics (NPs) are an emerging environmental contaminant of global concern due to their persistence and harmful effects on aquatic ecosystems. A novel dual-modified ultrafiltration membrane was developed for enhanced removal of NPs from secondary effluent collected from three wastewater treatment plants. The membrane was engineered with MIL-101(Cr), a metal-organic framework, in the active layer and a hydrogen-bonded organic framework derived from 4,4′,4″,4‴-(pyrene-1,3,6,8-tetrayltetrakis(ethyne-2,1-diyl))tetrabenzoic acid in the substrate layer. This study further identified and quantified the presence of three specific NPs in the collected effluent: poly(methyl methacrylate), polyethylene terephthalate, and polyvinyl chloride. Initial identification was performed using nanoparticle tracking analysis, and subsequently verified by using UV–Vis spectroscopy at specific absorbance peaks. Crossflow filtration tests showed excellent performance, achieving a permeability of ~1550 Lm −2 h −1 bar −1 and 97% NPs removal. This high efficiency arose from synergistic mechanisms of size-exclusion sieving, electrostatic repulsion, and the formation of a robust hydration layer that limited foulant adhesion. The membrane also exhibited excellent antifouling behaviour, maintaining a 97% flux recovery ratio after ten filtration cycles, while no chromium leaching was observed within pH 4–10, and 500–1500 ppm of NaOCl solution. These findings demonstrate the potential of dual-modified membranes as robust, high-efficiency filtration systems for long-term NPs removal in wastewater treatment plants. • PMMA, PET, and PVC nanoplastics were detected in effluents from three WWTPs. • Integration of MIL-101(Cr) and HOF layers enhanced selectivity and permeability. • Achieved ~97% nanoplastic removal with a permeability of 1550 Lm −2 h −1 bar −1 . • Exhibited excellent antifouling performance with 97% flux recovery after ten cycles.
More Papers Like This
Evaluating the performance of the metal organic framework-based ultrafiltration membrane for nanoplastics removal
AI summary Read the abstract
Researchers created an advanced membrane filter using metal-organic framework nanoparticles that removed over 99% of nanoplastics from water while maintaining high water flow rates. The membrane resisted fouling and worked reliably across multiple cycles and different water conditions. This type of technology could improve wastewater treatment plants' ability to prevent nanoplastics from reaching drinking water supplies.
Fabrication of dual-charged MOF-based ultrafiltration membrane to remove charged nanoplastics from wastewater
AI summary Read the abstract
Researchers developed a new type of water filter membrane that can remove over 99% of nanoplastics from wastewater while maintaining high water flow. The membrane uses metal-organic framework nanoparticles that repel plastic particles through electrical charges and physical filtering. This technology could help prevent nanoplastics, which are too small for conventional filters, from reaching drinking water sources.
Experimental Evaluation of the Process Performance of MF and UF Membranes for the Removal of Nanoplastics
AI summary Read the abstract
Researchers evaluated microfiltration (MF) and ultrafiltration (UF) membrane performance for removing polystyrene nanospheres (120 and 500 nm) from water, finding that UF membranes can achieve high removal of nanoplastic particles that conventional wastewater treatment misses.
An assessment of the impact of structure and type of microplastics on ultrafiltration technology for microplastic remediation
AI summary Read the abstract
Researchers assessed ultrafiltration technology for microplastic removal from water, finding that membrane performance varied based on microplastic structure, size, and polymer type, with implications for optimizing tertiary treatment in water purification systems.
Removal of microplastic particles in water by ultrafiltration: assessment of process performances using a new characterization and quantification analytical technique
AI summary Read the abstract
Researchers assessed the performance of ultrafiltration membranes for removing microplastic particles from water, developing a new characterization and quantification technique to evaluate removal efficiency. The study provides a methodological framework for filtration-based microplastic removal.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.