We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Effects of relative microplastic–biochar sizes and biofilm formation on fragmental microplastic retention in biochar filters
AI summary Read the abstract
Researchers tested biochar filters made from macadamia nutshells for removing microplastics from water and achieved up to 96% removal of small plastic fragments. Lower water flow rates and smaller microplastic particles led to better removal performance. This is a promising low-cost, natural approach to filtering microplastics from water, which could help reduce human exposure through drinking water.
Microplastics (MPs) pose significant risks to aquatic life and human health. Conventional water treatment is ineffective in removing MPs, demanding alternative technologies. Biochar exhibits a potential for removing MPs through adsorption and filtration. The efficiency of biochar derived from macadamia (Macadamia Integrifolia) nutshells on MP removal from contaminated water was assessed in fixed-bed column tests at environmentally relevant MP concentrations in upward flowing regime. Fragmental polyethylene MPs (50-100 and 100-300 μm) were tested on the effects of the operating conditions, the relative MP-biochar size ratios (0.05-0.14 and 0.13-0.36 for small and large MPs), and biofilm formation on their retention in the biochar bed. The interactions between MPs and biochar are apparently electrostatically repulsive. Small biochar demonstrated >78% removal of the MPs at flow rates of 2.78 × 10-5, 2.78 × 10-4, or 1.39 × 10-3 m/s. Increasing the MP influent concentrations significantly increased the MP removal by the filter. The lower flow rates increase the MP removal with both MP influent concentrations and MP sizes, showing a maximum of 96% removal of small MP. The removal of large MPs by biochar filters (i.e. MP-biochar size ratio: 0.13-0.36) is significantly different when the highest flow rate is used. This difference moderates as the flow rates and MP size decline. Biofilm formation at its early stage altered the porous characteristics and surface morphology of the biochar and enhanced the MP removal. Overall, this study provides insights into the application of biochar filters in tertiary wastewater treatment.
More Papers Like This
Investigation on the Impact of Varying Pyrolysis Temperature and Duration on the Effectiveness of Biochar in Removing Microplastics Using a Continuous-Flow Column-Based Process
AI summary Read the abstract
Researchers tested charcoal-like material (biochar) made from agricultural waste, such as palm kernel shells, to filter microplastics from lab-made wastewater flowing through a column. Biochar produced at 600°C for 4 hours removed about 99% of microplastic particles, mainly by physically filtering them rather than through chemical attraction.
Biochar applications in microplastic and nanoplastic removal: mechanisms and integrated approaches
AI summary Read the abstract
This review explores how biochar, a charcoal-like material made from organic waste, can be used to filter microplastics and nanoplastics out of water. Researchers found that biochar works through several mechanisms and becomes even more effective when combined with other water treatment technologies. The study suggests biochar-based approaches could be a practical, low-cost strategy for tackling plastic pollution in water systems.
Design and Evaluation of a Biochar-Integrated Supramolecular Fibrous Framework for Efficient Microplastics Removal from Aqueous Environments
AI summary Read the abstract
Researchers combined waste derived biochar with chitin and cellulose fibers to make a filter material, then tested it in lab columns for removing microplastics from water. A filter made only of quartz removed about 42% of polyethylene microplastics, while the biochar fiber combination removed about 95%, with better results at taller filter beds and slower water flow.
Engineered biochar for microplastic remediation in aquatic environments: Interfacial mechanisms, modification strategies, and future perspectives
AI summary Read the abstract
Tiny plastic particles are showing up everywhere in our water, and current treatment plants can only filter out 40-78% of them, meaning the rest ends up in our environment and potentially our bodies. This review paper highlights biochar—a charcoal-like material made from plant waste—as a cheap, eco-friendly filter that can be specially engineered to capture up to 99% of microplastics from water. While promising, scientists still need to standardize these methods and test them at larger scales before this becomes a widespread solution for cleaner drinking water.
Removal of polystyrene microplastics using biochar-based continuous flow fixed-bed column
AI summary Read the abstract
Scientists built a water filtration column using biochar made from banana peels that removed up to 92% of polystyrene microplastics from flowing water. The system works through a combination of adsorption, filtration, and the natural water-repelling interaction between the biochar and plastic particles. This low-cost approach using agricultural waste could offer a practical solution for removing microplastics from water in communities that lack advanced treatment infrastructure.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.