We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Impact of Combined Thermo- and Photo-Oxidation on the Physicochemical Properties of Oxo-Biodegradable Low-Density Polyethylene Films
AI summary Read the abstract
This study examined how heat and UV light together break down plastic films faster than either treatment alone, creating more chemical byproducts including esters and carboxylic acids. The combined weathering process accelerated the breakdown of both regular and so-called oxo-biodegradable plastics. This matters because it shows how everyday environmental conditions can fragment larger plastics into microplastics more quickly, increasing their potential to enter food, water, and the human body.
This research addresses the study of the combined effect of two abiotic treatments, a thermo-oxidative treatment followed by a photo-oxidative treatment with ultraviolet light, on the physicochemical properties of commercially available low-density polyethylene films with an oxo-degradant additive (OXOLDPE) and without (LDPE). The change in the oxidized film properties was characterized using FTIR, XRD, TGA, GPC, and SEM analytical techniques. The results indicated that the increment in carbonyl index (CI) and crystallinity percentage (XXRD) was higher for those films that received the combined oxidative treatments compared with those that received only one of them, thermo- or photo-oxidative treatment. Moreover, the combined oxidative treatments produced more ester and carboxylic groups on the degradation products than the other single treatments. An analysis of variance (ANOVA) was carried out, and a synergistic effect was observed between the thermo- and photo-oxidative treatments for both ester and carboxylic degradation products. TGA results revealed that the loss of thermal stability in the films was more significant after their exposure to the combined thermo- and photo-oxidative treatments compared with those which received only one. The GPC results showed that the combined oxidative treatment is necessary to decrease the Mz and Mz+1 average molecular weight of degraded films containing an oxo-degradant additive to the same extent as MW and Mn. The SEM surface appearance of the films changed more drastically after their exposure to the combined thermo- and photo-oxidative treatments, and they seemed to erode with the presence of inorganic fillers (CaCO3). These results suggest that the combined oxidative treatments produced degradation products with lower molecular weight and greater content of ester and carboxylic groups that should enhance its environmental biodegradability.
More Papers Like This
Thermal oxidation, ultraviolet radiation, and mechanical abrasion - understanding mechanisms of microplastic generation and chemical transformation
AI summary Read the abstract
Researchers evaluated how consumer-derived polymers fragment and chemically transform when exposed to UV radiation or thermal oxidation followed by soil abrasion. The study found that these combined weathering processes, which mimic real-world environmental conditions, significantly affect the rate and type of microplastic generation. The results highlight how everyday use and environmental exposure work together to break down plastics into microplastic particles.
The surface degradation and release of microplastics from plastic films studied by UV radiation and mechanical abrasion
AI summary Read the abstract
Researchers examined how UV radiation and mechanical abrasion, both individually and combined, cause plastic films to degrade and release microplastics. They found that the combination of UV exposure and physical wear was significantly more damaging than either factor alone, accelerating surface deterioration and particle release. The study provides evidence that everyday environmental conditions can generate substantial quantities of microplastics from common plastic materials.
Photo-induced degradation of single-use polyethylene terephthalate microplastics under laboratory and outdoor environmental conditions
AI summary Read the abstract
Researchers tested how sunlight, water, and physical wear work together to break down PET microplastics, the type commonly found in plastic bottles and food packaging. Over 60 days, combined UV light and water exposure caused significant chemical degradation of the plastic surfaces. This matters because as microplastics break down in the environment, they release smaller fragments and potentially harmful chemicals that are easier for organisms to absorb.
Peculiarity of the Mechanism of Early Stages of Photo-Oxidative Degradation of Linear Low-Density Polyethylene Films in the Presence of Ferric Stearate
AI summary Read the abstract
This study investigated how ferric stearate (an iron-based additive used in oxo-degradable plastics) accelerates the early stages of polyethylene photo-oxidation, finding that it acts not merely as a catalyst but actively generates radicals that fragment the polymer chain from the outset. While framed as a materials science study, the findings are relevant to the microplastics debate: oxo-degradable plastics marketed as environmentally friendly may in fact fragment more rapidly into persistent microplastic particles rather than fully mineralizing.
Physicochemical and biological ageing processes of (micro)plastics in the environment: a multi-tiered study on polyethylene
AI summary Read the abstract
Researchers studied how polyethylene undergoes both physicochemical and biological aging simultaneously in natural environments, finding that combined aging processes differ from each individually studied in isolation. Exposure to UV light, moisture, and microorganisms altered the plastic's surface chemistry and fragmentation pattern in ways that standard single-factor tests missed. This multi-tiered approach better reflects how microplastics actually degrade in nature.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.