0
Article Tier 2 Remediation Sign in to save

Efficient removal performance of polystyrene microplastics from strongly acidic solutions by two functionalized nanosized biochars derived from low-cost sustainable sources

The Science of The Total Environment 2025 9 citations

AI summary Read the abstract

Researchers created two low-cost cleaning materials from pineapple and artichoke waste that can remove polystyrene microplastics from water. These tiny biochar particles, modified with oxalic acid, were effective at capturing microplastics from acidic water solutions. The approach offers a sustainable and affordable way to help clean microplastic-contaminated water using agricultural waste that would otherwise be thrown away.

Polymers
Study Type Environmental

Microplastic pollution in aquatic systems and other environments has garnered significant concern due to its persistence, widespread environmental migration, and detrimental impact on entire ecosystems. Such pollution type poses severe threats to human life quality, as well as flora and fauna. In response to this pressing global issue, the current research explores a simple, sustainable, and cost-effective solution by employing two newly modified nanobiochar materials with oxalic acid, for the adsorptive removing of polystyrene microplastics (PSMPs) from aquatic systems. The two nanobiochars were derived from sustainable and low-cost feedstocks, specifically pineapple and artichoke wastes via pyrolysis at 300 °C and 350 °C, yielding NBP and NBA, respectively. These were subsequently modified with oxalic acid (OA) to create OA@NBP and OA@NBA nanobiosorbents. The EDX analysis confirmed the primary elemental composition of carbon, oxygen, nitrogen, calcium, and magnesium. TEM analysis revealed distinct differences in particle size and morphology of OA@NBA which displayed small particles ranging from 9.81 to 16.15 nm, while OA@NBP exhibited larger particles with size ranging from 68.86 to 105.12 nm, highlighting their structural differences. OA@NBP and OA@NBA nanobiosorbents were evaluated in PSMPs removing from aquatic systems providing the optimum conditions 30-50 mg nanobiosorbent, 40 min time and pH 2.0. The adsorption and binding mechanisms were best fitted to pseudo-second-order kinetics and Langmuir-Freundlich models. Thermodynamic analysis revealed that the adsorption process was non-spontaneous and endothermic. The loaded PSMPs on OA@NBA and OA@NBP nanobiosorbents were successfully regenerated and successively used to remove PSMPs with 86.8 % and 89.5 %, respectively, after the first regeneration step. Additionally, the two nanobiosorbents demonstrated excellent PSMPs removal efficiencies in simulated seawater samples adjusted to pH 2.0, achieving removal rates of 93.4 % (OA@NBA) and 87.4 % (OA@NBP). Therefore, the characterized PSMPs removal performance at pH 2.0 can afford a good avenue for potential application of the two explored nanobiosorbents in effective removal of PSMPs pollutant from other acidic industrial wastewater matrices.

More Papers Like This

Article Tier 2

Removal of polystyrene microplastics using biochar-based continuous flow fixed-bed column

AI summary Read the abstract

Scientists built a water filtration column using biochar made from banana peels that removed up to 92% of polystyrene microplastics from flowing water. The system works through a combination of adsorption, filtration, and the natural water-repelling interaction between the biochar and plastic particles. This low-cost approach using agricultural waste could offer a practical solution for removing microplastics from water in communities that lack advanced treatment infrastructure.

Article Tier 2

Exploring the Potential of Amino-Functionalized Zeolite Series/H3PO4-Biochar for Environmental Microplastic Removal

AI summary Read the abstract

Scientists developed a new material made from modified zeolite and coffee-waste biochar that can remove polystyrene microplastics from water. The material successfully cleaned both drinking water and wastewater samples, offering a potential low-cost tool for filtering microplastics out of water supplies. Reducing microplastics in drinking water is directly relevant to lowering human exposure.

Article Tier 2

Biochar-based adsorption technologies for microplastic remediation in aquatic ecosystems

AI summary Read the abstract

This review examines the use of biochar, a carbon-rich material made from organic waste, as a tool for removing microplastics from water. Biochar can effectively adsorb microplastic particles due to its porous structure and surface chemistry, and it can be produced cheaply from agricultural waste. The technology shows promise as an affordable and sustainable approach to reducing microplastic contamination in waterways, though challenges remain in scaling it up for real-world water treatment.

Article Tier 2

Preparation and application of metal-modified biochar in the purification of micro-polystyrene polluted aqueous environment

AI summary Read the abstract

Researchers developed iron-modified biochar, a charcoal-like material, that can remove over 96% of polystyrene microplastics from water under controlled lab conditions. The material worked well in tap water and lake water but was less effective in heavily polluted water with high levels of organic matter. This type of low-cost water treatment technology could help reduce the amount of microplastics in drinking water, though more work is needed to apply it at larger scales.

Article Tier 2

Engineered biochar for microplastic remediation in aquatic environments: Interfacial mechanisms, modification strategies, and future perspectives

AI summary Read the abstract

Tiny plastic particles are showing up everywhere in our water, and current treatment plants can only filter out 40-78% of them, meaning the rest ends up in our environment and potentially our bodies. This review paper highlights biochar—a charcoal-like material made from plant waste—as a cheap, eco-friendly filter that can be specially engineered to capture up to 99% of microplastics from water. While promising, scientists still need to standardize these methods and test them at larger scales before this becomes a widespread solution for cleaner drinking water.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper