We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Quantifying abrasion of microplastics from mountain bike tires
AI summary Read the abstract
Researchers quantified microplastic abrasion from mountain bike tires during real-world usage by measuring weight loss over the tire lifecycle. They found a median abrasion rate of 3.62 grams per 100 kilometers per bike, with the rear tire wearing faster than the front. When scaled to Germany's mountain biking population, the estimated emissions would contribute less than 1% to total annual microplastic pollution from tire wear, though the particles are released directly into natural environments.
Current research on microplastics (MPs) primarily focuses on investigating environmental samples, often lacking in identifying the actual sources and emission quantities. Little is known about the quantity of bicycle tire abrasion in real-use scenarios. Mountain biking, a popular outdoor sport produces tire wear particles (TWP) directly in natural environments. This study quantifies microplastic abrasion from mountain bike tires in real-life usage. We measured the weight loss of mountain bike tires gravimetrically over their period of use to quantify abrasion throughout their lifecycle. We found an abrasion rate of 3.62 g (median) per 100 km per mountain bike. The rate was higher for the rear tire (median 2.32 g; IQR = 1.58 to 3.59 g) compared to the front tire (median 1.32 g; IQR = 1.06 to 2.64 g). After higher abrasion rates of the new tire, rates decrease, and average abrasion stabilizes at around 1.43 g (median front and rear; IQR = 1.07 to 1.60 g) per 100 km per tire. This dynamic is due to the abrasion of excess material and sharp edges produced during manufacturing. Gravimetrically measuring material loss proved effective in assessing MP abrasion from mountain bike tires. Combining these findings with average bicycle kilometrage statistics for Germany results in an emission of 59 to 88 g of tire material per mountain biker per year. Calculated emissions from cycling (rider-number * average kilometrage * abrasion rate) would contribute <1 % to the total annual MPs emissions, significantly lower than motorized vehicle tires, which contribute about 30 %.
More Papers Like This
Quantifying the abrasion of microplastics from bicycle tires into the environment
AI summary Read the abstract
Scientists measured how much tiny plastic particles (called microplastics) are released when bicycle tires wear down during normal riding. They found that bike tires release much less plastic pollution than car tires - only about 0.4 to 3.6 grams per 60 miles compared to car tires that release 11 to 95 grams. This matters because microplastics can end up in our food and water, so understanding all sources helps us make better choices for reducing plastic pollution that could affect human health.
Tire Abrasion as a Major Source of Microplastics in the Environment
AI summary Read the abstract
This study analyzed tire wear particles as a major source of microplastics in the environment, estimating that tire abrasion contributes a substantial fraction of total microplastic emissions globally and highlighting road runoff as a key delivery pathway to waterways.
Wear and Tear of Tyres: A Stealthy Source of Microplastics in the Environment
AI summary Read the abstract
This paper compiles existing knowledge on tire wear as a major but often overlooked source of microplastics, estimating global per-person emissions at about 0.8 kilograms per year. Tire particles enter waterways, air, and soil, with an estimated 5-10% of ocean plastic pollution originating from tire wear. The study calls for increased awareness and creative solutions to address this stealthy yet substantial contributor to microplastic contamination.
Static modelling of the material flows of micro- and nanoplastic particles caused by the use of vehicle tyres
AI summary Read the abstract
Researchers modeled the flow of tyre wear particles in Austria, finding that about 6% of tyre rubber is released as wear particles into the environment each year, with emissions entering air, soil, and surface water. The study estimated that of the 21,200 tonnes released annually, about 6% are microscale particles and 0.3% are nanoscale, and concluded that reducing overall vehicle mileage would be the most effective way to cut these emissions.
Tire Wear and Pollutants: An Overview of Research
AI summary Read the abstract
This review provides an overview of tire road and wear particles as a major source of microplastic emissions, examining both experimental and mathematical approaches to measuring tire wear. The study notes that while tire wear particles are found in alarming amounts across various environments, they remain less studied than other microplastics, and calls for more accurate simulation models to predict tire wear emissions.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.