We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Electrochemically Assisted Fabrication of a Chitosan-Based Water Filter for Simultaneous Removal of Particle- and Fiber-Type Microplastics and Organic Dyes
AI summary Read the abstract
Researchers built a sponge-like filter from chitosan, iron, and a metal compound, and tested it in lab water filtration experiments. The filter removed over 93% of tiny plastic particles and fibers from tap water over five filtering cycles, and also removed up to 85.67% of a blue dye from water in separate tests.
Microplastic (MP) pollution and dye-contaminated wastewater have emerged as major environmental concerns due to their persistence, widespread distribution, and potential risks to aquatic ecosystems and human health. In this study, ZIF-67 grown on Fe3O4-incorporated chitosan sponge (FCS-ZIF-67) was fabricated via electrochemical deposition (ECD) for MP filtration and methylene blue (MB) adsorption. Filtration was evaluated using polyethylene terephthalate (PET) MPs (particle type) and MPs (fiber type); in each cycle, 5 mg of MPs in 5 L of tap water was filtered at −2 kPa (gauge). FCS-ZIF-67 exhibited high removal efficiencies of 93.54% and 96.81% for MPs (particle type) and MPs (fiber type), respectively, over five cumulative filtration cycles, with average flow rates of approximately 0.5 L min−1. The enhanced capture performance was attributed to the combined effects of the porous sponge structure and ZIF-67 surface functionalization, which likely promoted physical entrapment and particle retention. In addition, FCS-ZIF-67 demonstrated high MB adsorption performance, achieving a maximum removal efficiency of 85.67% at pH 8.5 after 120 min in batch tests. These results indicate that FCS-ZIF-67 is an effective multifunctional platform that removes MPs with different morphologies by filtration and adsorbs dissolved organic dyes, highlighting its potential for advanced tertiary wastewater treatment applications.
More Papers Like This
Porous chitosan microfiltration membranes for microplastics removal
AI summary Read the abstract
Researchers made water filtration membranes from chitosan, a natural material, to remove microplastics from water. In lab tests, membranes made by one preparation method filtered out more than 99% of polyvinyl chloride microplastic particles, while membranes made by a different drying method did not work as well.
The use of chitosan for water purification from microplastics
AI summary Read the abstract
Researchers investigated chitosan as a sorbent for removing microplastics from water, analyzing its physicochemical properties and proposing an optimized purification method based on chitosan's sorption characteristics.
The Utilization of Chitosan and Arduino Interface in Making a Microplastic Filter
AI summary Read the abstract
Researchers developed a water filtration device combining chitosan—a biopolymer—with an Arduino microcontroller interface to capture microplastics from water, demonstrating an affordable, sensor-equipped filter system that could be deployed for monitoring and removal in water treatment applications.
Coagulative removal of polystyrene microplastics from aqueous matrices using FeCl3-chitosan system: Experimental and artificial neural network modeling
AI summary Read the abstract
Scientists developed a water treatment method combining iron chloride and chitosan (a natural substance from shellfish) that removed up to 99.8% of polystyrene microplastics from water. The method worked effectively even on real wastewater from treatment plants, not just laboratory-prepared samples. This is a promising and practical approach for adding microplastic removal as a step in existing water treatment systems, which could help reduce human exposure through drinking water.
Utilization of chitosan as a natural coagulant for polyethylene microplastic removal
AI summary Read the abstract
Scientists tested chitosan, a natural material derived from shellfish, as an eco-friendly way to remove polyethylene microplastics from water. Under the best conditions (pH 6.0 with 100 mg/L of chitosan), the treatment removed 81.5% of microplastics, offering a promising and environmentally safe approach to cleaning microplastic-contaminated water.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.