We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Additive Manufacturing of Photocatalytic Reactors for Water Remediation: Architectures, Validation Standards, Reusability, and Scale-Up
AI summary Read the abstract
This review paper examines research on using 3D printing to build water treatment devices that break down pollutants, including microplastics, pharmaceuticals and PFAS, using light-activated reactions. Based on nine prior studies, the authors note that current designs lack standardized testing and have not been proven reusable or scalable for real-world use.
Photocatalysis is a powerful advanced oxidation process for water remediation, yet benchmarking has disproportionately relied on model organic dye pollutants under idealized conditions—overstating practical performance and obscuring mechanistic complexity. Three-dimensional (3D) printing now offers an unprecedented opportunity to engineer photocatalytic reactors with precisely controlled architectures, optimized mass transfer, tunable porosity, and defined light-penetration channels—capabilities unattainable with conventional slurry or thin-film configurations. This systematic and critical review examines the state of the art in additive manufacturing of photocatalytic reactors for water treatment, focusing on three under-developed dimensions: (i) performance validation against environmentally relevant contaminants—pharmaceuticals, endocrine-disrupting compounds (EDCs), PFAS, microplastics, and waterborne pathogens; (ii) mechanistic rigor, including reactive oxygen species (ROS) identification, quantum yield determination, and mineralization metrics; and (iii) genuine reusability under realistic cycling conditions. The dominant printing modalities—FDM/FFF, SLA, DLP, DIW, and binder jetting—are critically evaluated for photocatalyst loading, geometric resolution, and scalability. A persistent gap is identified between proof-of-concept studies and systems capable of rigorous quantitative benchmarking. To address this, a minimum reporting standard is proposed, and the materials, engineering, and regulatory challenges that must be resolved before 3D-printed photocatalytic reactors can transition from academic novelties to deployable treatment units are outlined. A total of nine peer-reviewed studies, identified through a systematic search of Scopus and Web of Science (2016–2026), form the evidence base for the quantitative assessments reported herein. Screening and data extraction were performed by a single reviewer (G.K.) without independent verification, which represents a limitation of the review.
More Papers Like This
Recent Advances in Photocatalytic Removal of Microplastics: Mechanisms, Kinetic Degradation, and Reactor Design
AI summary Read the abstract
This review examines how photocatalytic processes, which use light-activated materials to generate reactive molecules, can be used to break down microplastics in water. Researchers surveyed the mechanisms behind photocatalytic degradation of common plastics like polyethylene and polystyrene, as well as reactor designs that could make the technology practical. The study highlights photocatalysis as a promising approach for tackling microplastic pollution but notes that scaling up these systems remains a major challenge.
Recent advances in photocatalytic technologies for removing microplastics from aquatic environments
AI summary Read the abstract
This review paper summarizes existing research on using light-activated materials (photocatalysts) to break down microplastics in water. It compares five material types tested in lab settings, noting some achieved high breakdown rates under UV or visible light, while identifying unresolved challenges like treating certain plastic types and assessing long-term environmental safety.
Recent Advances in Microplastics Removal from Water with Special Attention Given to Photocatalytic Degradation: Review of Scientific Research
AI summary Read the abstract
This review examines methods for removing microplastics from water, with a focus on photocatalytic degradation, which uses light-activated materials to break down plastic particles. These advanced processes generate reactive molecules that can fragment microplastics into harmless byproducts. While promising, the technology still needs optimization and more research into potential harmful byproducts before it can be widely deployed.
Advancing photocatalytic strategies for microplastic degradation in aquatic systems: Insights into key challenges and future pathways
AI summary Read the abstract
This review examines how light-activated chemical reactions (photocatalysis) can break down microplastics in water, using advanced materials like doped semiconductors and metal-organic frameworks. While promising for cleaning up waterways, challenges remain around scaling these methods for real-world use and ensuring the breakdown products are not themselves harmful.
Photocatalytic Technologies for Transformation and Degradation of Microplastics in the Environment: Current Achievements and Future Prospects
AI summary Read the abstract
This review examines photocatalytic technologies that use light-activated materials to break down microplastics in the environment. Various catalysts can generate reactive oxygen species that degrade plastic polymers into simpler, less harmful molecules. The authors assess the strengths and limitations of different photocatalytic approaches and highlight the need for scalable solutions that work under real-world environmental conditions.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.