We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Electro-oxidation of Polystyrene Nanoplastics Using a Titanium-based Anode Modified with Ag–Sn/Pb–PbO₂: ANN-PSO Modeling
AI summary Read the abstract
Researchers tested a specially coated metal electrode to break down polystyrene nanoplastics in water using an electrical treatment method. In lab experiments, a computer model helped find the best settings, achieving 91.43% removal of the nanoplastics within 90 minutes under optimized conditions.
Abstract Polystyrene nanoplastics (PS NPs) are persistent water contaminants that conventional treatment processes struggle to remove. In this study, a multilayer Ti/TiO₂–Ag–Sn/Pb–PbO₂ (TASP) anode was synthesized and evaluated for the electro-oxidation of PS NPs. The TASP electrode exhibited a high oxygen-evolution potential of 1.97 V vs. Ag/AgCl, reduced charge-transfer resistance, and an extended accelerated service life of 188 s under harsh test conditions, indicating greater relative stability than the reference electrodes. The effects of pH, initial PS-NP concentration, and current density on removal efficiency were investigated using a maximin Latin hypercube design (LHS) augmented with a two-level factorial, and both RSM and ANN-PSO models were developed for process prediction. The ANN-PSO model showed superior predictive performance ( R² = 0.953) compared with the RSM model ( R² = 0.919), confirming its superior ability to capture the nonlinear behavior of the system. Coupling ANN-PSO with a genetic algorithm identified the optimum operating conditions to be pH 6.46, initial concentration 20 ppm, and current density 11.44 mA cm⁻², with a predicted removal efficiency of 90.64%. Experimental validation under the optimized conditions gave 91.43% removal within 90 min, confirming the reliability of the proposed optimization framework. Kinetic analysis showed that PS-NP degradation followed pseudo-first-order behavior, with the TASP electrode exhibiting the highest apparent rate constant, approximately 3.2 times greater than that of the unmodified Ti/TiO 2 /Pb-PbO 2 electrode. These results demonstrate that combining an Ag–Sn-modified PbO₂-based anode and a data-driven modeling and optimization strategy provides an effective and interpretable approach for PS-NP electro-oxidation.
More Papers Like This
Electrochemical oxidation degradation of polystyrene nanoplastics by Sm-Mn intermediate layer Ti/Sb-SnO2 anode: Composite metal elements enhance electron transfer and promote the generation of hydroxyl radicals
AI summary Read the abstract
Researchers developed a titanium anode co-doped with samarium and manganese to electrochemically degrade polystyrene nanoplastics in water, achieving 58.75% removal efficiency and an 825-hour electrode lifespan, with density functional theory calculations revealing that the bimetal synergy accelerates electron transfer and hydroxyl radical generation that cleave plastic polymer chains.
Effective degradation of polystyrene microplastics by Ti/La/Co-Sb-SnO2 anodes: Enhanced electrocatalytic stability and electrode lifespan
AI summary Read the abstract
Researchers developed a new electrode that can break down polystyrene microplastics in water through an electrical process called electrocatalytic oxidation. By adding cobalt as an intermediate layer, they significantly extended the electrode's lifespan without sacrificing its ability to degrade microplastics. The study suggests this technology could offer a practical and durable method for removing microplastic pollution from water.
Treatment of microplastics in water by anodic oxidation: A case study for polystyrene
AI summary Read the abstract
Anodic oxidation (electrooxidation) was tested as a method for degrading polystyrene microplastics suspended in water. The electrochemical treatment showed progressive microplastic degradation, demonstrating potential for electrooxidation as a water treatment approach targeting suspended plastic particles.
Electrochemical and photoelectrochemical oxidation processes for polystyrene microplastic treatment: BDD anode vs Sb-doped SnO2 ceramic anode coated with a CdFe2O4 photocatalytic layer
AI summary Read the abstract
Researchers compared two electrode-based methods for breaking down polystyrene microplastics in water: a boron-doped diamond anode and a ceramic anode with a light-activated coating. Both approaches achieved over 95% removal of microplastics, with the diamond anode reaching up to 99% efficiency. The study demonstrates that electrochemical oxidation is a promising technology for removing microplastic contamination from water.
Electrooxidation of polystyrene nanoplastics by BDD electrodes
AI summary Read the abstract
Researchers tested boron-doped diamond electrodes across three doping levels to electrochemically destroy 100 nm polystyrene nanoplastics, finding that persulfate radical generation—rather than hydroxyl radicals or hydrogen peroxide—was the primary degradation driver, and that the optimal doping level depended on the applied current density.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.