0
Article Tier 2 Detection Methods Environmental Sources Human Health Effects Marine & Wildlife Nanoplastics Remediation Sign in to save

A membrane cascade for size-based separation and concentration of nanoplastics in environmental waters

Separation and Purification Technology 2025 2 citations

AI summary Read the abstract

Researchers developed a cascade system of membrane filters that can separate and concentrate nanoplastics from environmental water samples by size. They demonstrated that the system effectively isolates nanoplastic particles while tracking recovery rates using fluorescent markers. The technology addresses a major challenge in nanoplastic research by providing a reliable method to extract these extremely small particles from water for accurate measurement and analysis.

Polymers
Study Type Environmental

• Succession of microfiltration membranes enables separation of nanoplastics by size. • Fluorescent polystyrene latex allow to track membrane selectivity and recoveries. • Modelling unravels the coupling between fouling, selectivity and recovery. • The cascade concept is tested with natural water doped with model nanoplastics. • Critical filtered mass and recovery decrease with higher NOM concentrations. The presence of nanoplastics (NP) in freshwater and seawater is a growing environmental concern, although little is known about their amount, structure or behaviour associated with natural organic matter (NOM). While efforts have been made to isolate them, previous protocols were not able to minimize losses during extraction, preventing reliable characterization. Additionally, NP size fractionation, crucial for understanding of their transport dynamics and toxicity, remains challenging. This study presents a new protocol using a cascade of microfiltration (MF) membranes to i) extract NP from natural waters, ii) separate them by size range, iii) concentrate each fraction, iv) maximize recovery rates. Filtration experiments were performed using fluorescent polystyrene nanoplastics (PS NPs) of various sizes to account for the size polydispersity of environmental NP and evaluate membrane selectivity. Coupled with comprehensive membrane characterization and fouling models, the results showed that cascading a 2 µm stainless steel grid, a 0.45 µm PVDF membrane and a 0.1 µm PES membrane successfully allowed to separate NP into three size ranges (< 50 nm; 50–500 nm; 50–2000 nm), while achieving repeatable recoveries of 52 % for 500 nm PS NPs, 95 % for 200 nm PS NPs and 93 % for 50 nm PS NPs. The cascade was also tested on real river water doped with PS NPs: selectivity and recovery of all size fractions could be maintained for NOM concentrations of 0.11–0.54 mg/L. The development of this filtration cascade will serve as a foundation for efficient extraction of environmental NP, and unveils new knowledge about the use of MF membranes in this prospect.

More Papers Like This

Article Tier 2

A Novel Application of Filtration for the Collection of Microplastics in Waterways

AI summary Read the abstract

Researchers developed a novel filtration system for collecting microplastics from waterways, demonstrating its effectiveness as a scalable and practical tool for environmental monitoring and plastic pollution assessment.

Article Tier 2

Nanoporous membrane filter cascade for size‐selective analysis of nano‐ and microplastic particles

AI summary Read the abstract

Researchers developed a nanoporous membrane filter cascade system capable of size-selective analysis of plastic particles spanning from microplastic dimensions down to 10 nm nanoparticle dimensions, addressing the challenge of analyzing nano- and microplastics across several orders of magnitude in particle size for drinking water and food chain health impact studies.

Article Tier 2

Separation and enrichment of nanoplastics in environmental water samples via ultracentrifugation

AI summary Read the abstract

An ultracentrifugation protocol was developed and validated for separating and concentrating nanoplastics from environmental water samples, enabling detection of particles below 100 nm that are otherwise lost during conventional filtration-based processing, and revealing nanoplastics in river water samples at concentrations not previously quantified.

Article Tier 2

Sequential Isolation of Microplastics and Nanoplastics in Environmental Waters by Membrane Filtration, Followed by Cloud-Point Extraction

AI summary Read the abstract

Researchers developed a two-step method combining membrane filtration and cloud-point extraction to sequentially isolate microplastics and nanoplastics from water, achieving over 90% recovery for MPs on membrane filters and over 93% recovery for NPs in the filtrate for subsequent Py-GC/MS analysis.

Article Tier 2

Extraction and concentration of nanoplastic particles from aqueous suspensions using functionalized magnetic nanoparticles and a magnetic flow cell

AI summary Read the abstract

Researchers developed a method using hydrophobic magnetic nanoparticles to capture and concentrate nanoplastics — plastic particles smaller than 1 micrometer — from water samples, achieving recovery rates of 57–85% across different water types including freshwater and seawater. This technique addresses a major gap in nanoplastic research by making it possible to detect and measure these nearly invisible particles in real environmental samples.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper