We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Polyurethane Scintillators for High-Energy Physics Detectors: Optimization, Scale-up, and Radiation Response
Plastic scintillators remain attractive for large-area particle detectors because of their fast response, mechanical flexibility, and relatively simple fabrication. Motivated by future applications including the ALICE~3 Muon Identifier (MID) and the upgrade of the ALICE Fast Interaction Trigger (FIT), this work investigates polyurethane (PU)-based plastic scintillators doped with 2,5-diphenyloxazole (PPO) and 1,4-bis(5-phenyloxazol-2-yl)benzene (POPOP). Systematic information on the optimization and radiation response of this material system remains limited. A series of compositions was therefore fabricated and characterized using minimum-ionizing particles (MIP), optical spectroscopy, and time-correlated single-photon counting. The measurements show that the scintillation response is governed primarily by the PPO concentration, while POPOP mainly modifies the spectral response, and fast effective decay times of approximately 1.6--1.75~ns are maintained across the doped samples. The best-performing formulation was subsequently scaled to 20-$cm$ and 1-m scintillator bars and successfully operated with a single embedded wavelength-shifting fiber and SiPM readout, demonstrating its suitability for meter-scale light collection. Proton-irradiation measurements at the CERN IRRAD facility further revealed systematic degradation of the optical and scintillation responses with increasing exposure, together with substantial recovery after approximately two months. These results demonstrate that optimized PU--PPO--POPOP scintillators can combine fast timing, high light output, scalable detector geometry, and recoverable radiation response, supporting their further development for future large-area particle-detector systems.
More Papers Like This
Performance of the front-end trigger detector for the High-energy Proton Beam Experimental Station (HPES) at CSNS-II
Modifications of Polymers through the Addition of Ultraviolet Absorbers to Reduce the Aging Effect of Accelerated and Natural Irradiation
AI summary Read the abstract
Ultraviolet absorbers added to polymer formulations were reviewed for their effectiveness in reducing photodegradation, which can break polymer bonds and form free radicals that accelerate microplastic generation, with the review identifying conditions where UV stabilizers most effectively extend plastic service life.
Laboratory-Simulated Photoirradiation Reveals Strong Resistance of Primary Macroplastics to Weathering
AI summary Read the abstract
Researchers exposed five common plastic types to simulated UV radiation equivalent to 25–75 years of sunlight and found that while surface layers became highly oxidized and eroded, the bulk polymer remained largely intact, highlighting the strong resistance of industrial macroplastics to weathering and the resulting persistence of plastic pollution.
Morphology and Performance of PolyVinyl Chloride Thin Films Doped with Polyorganosilanes against Photodegradation
AI summary Read the abstract
Researchers synthesized three polyorganosilane additives in ortho, meta, and para geometries, incorporated them into PVC thin films, and evaluated their photostabilizing performance under long-term UV irradiation, comparing their effectiveness in retarding PVC photodegradation as a function of the additive's stereo geometry.
Colloidal stability and aggregation of polyethylene (PE) nanoplastics under UV weathering and PFOA contamination.
AI summary Read the abstract
Researchers characterized the colloidal stability of 200-nm polyethylene nanoplastics under UV weathering and PFOA contamination using dynamic light scattering and zeta potential measurements, finding that UV weathering—through free radical formation—strongly promotes aggregation, while PFOA adsorption adds only a minor stabilizing barrier, implying that photochemical aging is the dominant environmental modifier of PE nanoplastic fate.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.