0
Article Tier 2 Sign in to save

LIGHT-CDS: A light-up Cas12a–DNAzyme–spinach assay for label-free and amplification-free detection of PVC and PS microplastics

AI summary Read the abstract

Researchers developed a lab test called LIGHT-CDS that detects PVC and PS microplastics by producing a glowing signal without needing extra chemical labels or amplification steps. In tap water and river water samples, the test accurately measured added PVC microplastics and kept working reliably for at least 21 days of storage.

Polymers
Study Type Environmental

Microplastic contamination has become an increasing concern in food and drinking-water safety, creating a need for simple and polymer-selective analytical methods. Herein, we developed a target-on fluorescence assay, termed LIGHT-CDS, for the label-free and amplification-free detection of polyvinyl chloride (PVC) and polystyrene (PS) microplastics. The assay integrates a microplastic-responsive T-DNA release module with a Cas12a–DNAzyme–Spinach light-up circuit. Binding of PVC or PS to an aptamer-locked T-DNA complex releases T-DNA and activates Cas12a trans-cleavage. Activated Cas12a subsequently cleaves and inactivates the 10–23 DNAzyme, thereby protecting Baby Spinach RNA from degradation and enabling fluorescence generation through DFHBI-1T binding. Under optimized conditions, LIGHT-CDS generated concentration-dependent responses to PVC and PS over a tested calibration interval of 0.1–500 μg/mL, with detection limits of 96.7 and 139.3 ng/mL, respectively. The assay exhibited good selectivity against common non-target particles, maintained reliable responses in mixed-particle systems, and retained approximately 90% of its initial response after 21 days of storage. In spiked tap-water and river-water samples, PVC recoveries ranged from 94.3% to 115.3%, with relative standard deviations not exceeding 7.1%. These results establish LIGHT-CDS as a simple, programmable, and labeled-probe-free analytical platform for PVC/PS microplastic screening in water matrices and support further validation toward food and beverage applications.

More Papers Like This

Article Tier 2

Selective Recognition and Portable Quantification of PVC Microplastics Using a Water-Soluble AIE Fluorescent Probe

AI summary Read the abstract

Scientists created a special glow-in-the-dark dye that lights up specifically when it touches PVC microplastics—a common but concerning type of plastic pollution—in water samples like tap water, lake water, and even seawater. This matters because right now it's hard to quickly identify which type of microplastic is contaminating our water, and this simple test could help researchers track PVC pollution (which can release harmful chemical additives) more easily, without needing complicated lab equipment. While this study focused on detection technology rather than health effects directly, better tools like this are an important step toward understanding and monitoring our exposure to potentially harmful plastics

Article Tier 2

Unlocking Self-Luminescence of Pyrene-Based Metal–Organic Gel for Sensitive Electrochemiluminescence Assay of Microplastics

AI summary Read the abstract

Scientists have developed a new light-based sensor that can detect tiny amounts of microplastics (like PVC and PS, common in plastic products) in water, even at very low levels. This matters because microplastics can build up in our bodies and may pose health risks, so having a fast, sensitive way to spot them could help track and reduce our exposure. The technology works by cleverly boosting a glowing molecule's brightness, making the test far more sensitive than previous methods—without needing extra chemicals to trigger the glow.

Article Tier 2

Spectral–temporal autofluorescence analysis for rapid and label-free microplastic differentiation in aquatic environments

AI summary Read the abstract

Researchers tested a new way to identify 22 types of plastic by measuring their natural glow (autofluorescence) instead of using chemical labels. Combining two types of light signal measurements correctly identified the plastic type up to 95.7% of the time, suggesting this method could work for fast detection of microplastics in water samples.

Article Tier 2

Fast and portable fluorescence lifetime analysis for early warning detection of micro- and nanoplastics in water

AI summary Read the abstract

Researchers developed a portable fluorescence-based system that can detect micro- and nanoplastics in water without any sample preparation or labeling. The method works by measuring the natural fluorescence lifetime of plastic particles using a pulsed laser, achieving detection limits as low as 0.01 mg/mL. The study presents a promising early-warning tool for rapid, on-site monitoring of plastic contamination in water sources.

Article Tier 2

Development of a Dye-Binding Method for Nanoplastics Detection in Water and Snow Samples using Capillary Electrophoresis with Laser Induced Fluorescence

AI summary Read the abstract

Scientists developed a fast, sensitive test that uses glowing dyes to detect tiny plastic particles (nanoplastics) in water, particles so small that older methods often miss them. This matters because nanoplastics may pose health risks we're still working to understand, and better detection tools help us track contamination in drinking water and evaluate cleanup methods. In fact, the researchers also tested a simple protein (casein) that removed 94% of nanoplastics from water, offering a promising step toward practical solutions.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper