We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Mechanistic insights into electrocoagulation-driven removal of polystyrene nanoplastics from urban treated wastewater
AI summary Read the abstract
Regular wastewater treatment doesn't catch tiny plastic particles called nanoplastics, so they end up flowing into rivers and lakes, where studies show they're toxic to aquatic life. This research found that an electrical treatment method (using a mild electric current with metal electrodes to clump particles together) can remove essentially all nanoplastics from treated wastewater and completely eliminate the toxic effects they cause. While this study tested effects on a bacteria-based toxicity indicator rather than directly on humans, it points to a promising, practical way to keep these pollutants out of waterways before they can accumulate in the food ch
The occurrence of nanoplastics in urban treated wastewater represents an emerging environmental risk due to their high mobility, bioavailability, and documented toxicity toward aquatic organisms. Conventional wastewater treatment processes are largely ineffective at retaining nanoplastics, enabling their continuous discharge into receiving water bodies. In this study, electrocoagulation (EC) using aluminum and iron electrodes was evaluated as a tertiary treatment for the selective removal of polystyrene nanoplastics (PS-NPs, 175 nm, 20 mg L -1 ) from a simulated urban treated wastewater matrix, at current densities ranging from 1 to 10 mA cm -2 . Complete removal of PS-NPs was achieved under all operating conditions, as evidenced by >99% turbidity reduction and the full elimination of the TOC fraction associated with nanoplastics, while dissolved organic matter remained unaffected. Aluminum electrodes exhibited faster removal kinetics at low current density (1 mA cm -2 ), whereas both materials showed comparable performance at higher current densities. Mechanistic analysis combining metal dissolution profiles, zeta potential evolution, coagulant-pH speciation diagrams, X-ray diffraction, and transmission electron microscopy demonstrated that nanoplastics destabilization and capture are governed by sweep flocculation driven by in-situ generated metal (oxy)hydroxides. The untreated wastewater exhibited significant acute toxicity toward Aliivibrio fischeri (EC50 = 30%), which was completely suppressed within 20 min of electrocoagulation treatment for both electrode materials, without the need for oxidative degradation or mineralization. To the best of the authors' knowledge, this is the first study to evaluate electrocoagulation for nanoplastics removal in a complex, realistic wastewater matrix and the first to directly link physicochemical removal performance to the abatement of nanoplastics-driven acute ecotoxicity. These findings highlight electrocoagulation as a robust and selective polishing step capable of eliminating nanoplastics-associated toxicity from treated wastewater effluents. • Nanoplastics induce significant acute toxicity in treated wastewater matrices. • Electrocoagulation selectively removes nanoplastics without affecting organics. • Nanoplastics-driven toxicity is fully suppressed at short electrocoagulation times. • Sweep flocculation by in-situ metal (oxy)hydroxides governs nanoplastics removal. • Electrocoagulation is an effective tertiary barrier against nanoplastics.
More Papers Like This
Evaluating the performance of electrocoagulation system in the removal of polystyrene microplastics from water
AI summary Read the abstract
Researchers tested electrocoagulation, a water treatment method that uses electric current to clump particles together, for removing polystyrene microplastics from water. Using aluminum electrodes at neutral pH, they achieved over 90% removal efficiency. This technology could provide a practical and effective way to remove microplastics from drinking water and wastewater, reducing human exposure to these contaminants.
Efficient removal of nanoplastics from synthetic wastewater using electrocoagulation
AI summary Read the abstract
Researchers demonstrated that electrocoagulation using aluminum electrodes can remove more than 95% of polystyrene nanoplastics from synthetic wastewater, offering a promising treatment upgrade for conventional wastewater plants that currently allow nanoplastics to pass through.
Electro-Fenton removal of polystyrene nanoplastics from urban treated wastewater using a biodegradable iron chelating agent
AI summary Read the abstract
Scientists tested a new water treatment method that uses electricity and an eco-friendly iron additive to break down tiny plastic particles (nanoplastics) left over in treated wastewater, the kind regular treatment plants often miss. The method removed up to 91% of these plastic particles while using far less energy than older techniques, which matters because these microscopic plastics can end up in rivers, drinking water, and eventually our bodies. More testing on real wastewater (not just lab-made samples) is still needed before this could be used widely, but it's a promising step toward cleaner water and less plastic exposure.
Removal of polystyrene nanoplastics from urban treated wastewater by electrochemical oxidation
AI summary Read the abstract
Scientists demonstrated a new method for removing polystyrene nanoplastics from treated wastewater using electrochemical oxidation with a special diamond-coated electrode. The technique achieved over 90% removal of the nanoplastics and reduced the toxicity of treated water to non-toxic levels. This approach could be a practical addition to existing wastewater treatment to address nanoplastic pollution that slips through conventional systems.
Efficient removal of nanoplastics from industrial wastewater through synergetic electrophoretic deposition and particle-stabilized foam formation
AI summary Read the abstract
Researchers developed a new method to remove nanoplastics from industrial wastewater by combining electrophoretic deposition with particle-stabilized foam formation. The process uses pH changes from water electrolysis to make tiny plastic particles attach to bubbles near the electrode, achieving removal rates above 90%. The technique was successfully tested on real-world wastewater from paint and plastics manufacturing, offering a practical approach to addressing nanoplastic pollution that is too small for conventional filters.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.