We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Saturated hydraulic conductivity in microplastics incorporated soils: Effects of soil texture, polymer type, particle size, and concentration
AI summary Read the abstract
Researchers measured saturated hydraulic conductivity in loam and sandy loam soils amended with PET, PVC, and PE microplastics of two size classes, finding that PET particles in sandy loam produced the highest conductivity values and that polymer hydrophobicity and particle size both influence soil water flow.
The present study investigated the saturated hydraulic conductivity (Ks) of two distinct textured soils (loam and sandy loam) in the presence of three different types of plastic polymers [polyethylene terephthalate (PET), polyvinyl chloride (PVC), and polyethylene (PE)] of two different sizes (0.5 to < 1 mm and < 0.5 mm). The Ks was measured in this experiment using the constant-head approach, which follows the concept of Darcy's law. In sandy loam soils (sand 62%), PET particles ranging from 0.5 mm to < 1 mm had the highest Ks (2.1 cm/h). Since PET particles are more hydrophobic than PVC, as seen in prior investigations, the highest Ks in the presence of PET reflects the impact of the hydrophobicity of the resulting particles on water repellency. Additionally, the average trend of Ks is PET > PVC > PE. The effect of increased pore dimensions might represent the mechanism underlying the greater Ks in sandy loam soils than in loamy soils. Two mechanisms, pore dimension increase, and pore-clogging influence the Ks value at low and high concentrations, respectively. However, significant variations in the effects of MP size on Ks were not detected. In this investigation, regardless of particle size, the pore dimension mechanism often increased the Ks at low concentrations. In contrast, the pore-clogging effects prevailed at higher concentrations, affecting and decreasing the Ks value. In addition, the Ks value in the presence of PE particles in loam and sandy loam soils decreased as the concentration increased, and the Ks value was higher for smaller PE particles than for larger PE particles. Due to the limited data on the effects of MP polymer type and size on the Ks of soil within a narrow range of contamination inputs, it might reveal substantial implications for nutrient and pollutant transport in soil. The authors designed to examine the paucities in MP investigation in this unlikely polluted condition of soil environments.
More Papers Like This
Concentration‐ and Size‐Dependent Influences of Microplastics on Soil Hydraulic Properties and Water Flow
AI summary Read the abstract
Researchers investigated how microplastic concentration and particle size affect soil hydraulic properties and water flow. They found that microplastic contamination reduced saturated conductivity by up to 50% and inhibited water infiltration, with higher concentrations and larger particle sizes leading to weaker soil water-holding capacity.
Effects of microplastic particles on vertical water flow in soil columns
AI summary Read the abstract
Researchers investigated how different types of microplastic particles added to soil columns at varying concentrations affect water flow through the soil profile. They found that certain microplastic shapes and concentrations altered the soils hydraulic conductivity, with potential implications for irrigation efficiency and water movement in plastic-contaminated agricultural fields. The study addresses an underexplored aspect of microplastic impact on soil function.
Effects of microplastics on the hydraulic properties and pore characteristics of compacted soil
AI summary Read the abstract
Researchers investigated how polyethylene microplastics affect the hydraulic properties and pore structure of compacted soil, finding that higher microplastic concentrations disrupted pore size distribution and reduced saturated hydraulic conductivity while altering water retention capacity.
Effects of microplastic on water flow and contaminant transport in water-saturated sand
AI summary Read the abstract
This study tested how microplastic contamination in sandy soil affects water flow and the transport of contaminants through the soil, measuring hydraulic conductivity and dispersion characteristics. The results indicate that microplastics alter soil hydraulic properties, which could affect groundwater recharge and pollutant mobility in contaminated soils.
Soil texture governs the influence of different microplastics on soil hydraulic properties
AI summary Read the abstract
This study tested how different types of microplastics affect soil hydraulic properties across varying soil textures, finding that soil texture strongly governs the magnitude of MP impacts on water retention and hydraulic conductivity, with fine-textured soils showing different responses than coarse-textured ones.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.