We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Tire Wear Particle Emissions from Mining Operations: A Meta-Analytical and Tribological Modeling Assessment
AI summary Read the abstract
This study estimated tiny plastic particles worn off huge mining truck tires at a large open-pit copper mine, using data from past research, expert opinion, and a mathematical model. It found mining tires wear differently than road vehicle tires, producing about 75 tonnes of tire particles yearly across the mine's operations, with results ranging from roughly 38 to 113 tonnes.
Abstract Tire wear particles (TWPs) represent a significant yet insufficiently quantified source of microplastic pollution. While TWP emissions from transportation systems have been widely studied, emissions from mining operations remain poorly constrained despite the extreme operating conditions of ultra-class off-the-road tires. This study quantifies TWP emissions from mining operations using a comparative meta-analytical and modeling framework, supported by a systematic meta-analysis of 50 peer-reviewed transportation-sector studies. To address mining-specific data limitations, a structured expert elicitation survey involving 56 specialists was conducted to identify and rank operational and environmental parameters governing TWP generation. Road surface quality, tire type, and inflation pressure were identified as the dominant drivers of wear in mining environments. Cross-sector comparison revealed a statistically significant difference in pooled effect sizes between transportation and mining systems (p = 0.0017), indicating a shift from predominantly dynamic frictional wear in transportation to static, high-load cutting and impact wear in mining. A semi-empirical tribological model calibrated using site-specific operational data from a large open-pit copper mine estimated a TWP emission rate of 3.67 g/vkm. The estimated magnitude was benchmarked against published heavy-duty vehicle emission factors and evaluated through deterministic sensitivity testing and Monte Carlo uncertainty propagation. The results confirm that the model outputs are consistent with established tire wear mechanisms and exhibit variability within realistic operational ranges. When scaled to fleet operations, this corresponds to approximately 75 tonnes of tire-derived microplastics released annually within the mine footprint, with an estimated uncertainty range of approximately 38–113 tonnes per year based on probabilistic analysis.
More Papers Like This
Tire Wear and Pollutants: An Overview of Research
AI summary Read the abstract
This review provides an overview of tire road and wear particles as a major source of microplastic emissions, examining both experimental and mathematical approaches to measuring tire wear. The study notes that while tire wear particles are found in alarming amounts across various environments, they remain less studied than other microplastics, and calls for more accurate simulation models to predict tire wear emissions.
Estimation of Tire Wear Particle Emissions from Civilian Vehicles
AI summary Read the abstract
Researchers developed a predictive modeling tool for estimating tire wear particle emissions from civilian vehicles at scale, providing a practical framework for large-scale TWP emission risk assessment projected through 2050.
Static modelling of the material flows of micro- and nanoplastic particles caused by the use of vehicle tyres
AI summary Read the abstract
Researchers modeled the flow of tyre wear particles in Austria, finding that about 6% of tyre rubber is released as wear particles into the environment each year, with emissions entering air, soil, and surface water. The study estimated that of the 21,200 tonnes released annually, about 6% are microscale particles and 0.3% are nanoscale, and concluded that reducing overall vehicle mileage would be the most effective way to cut these emissions.
Development of a parametrized and regionalized life cycle inventory model for tire and road wear particles
AI summary Read the abstract
Researchers developed a detailed model for estimating tire and road wear particle emissions, a major but often overlooked source of microplastics from vehicle traffic. The model accounts for nine key factors including road texture, driving behavior, temperature, and tire type, and can generate estimates at both individual vehicle and national scales. The study found that road surface roughness, aggressive driving, and wet conditions are the biggest drivers of large particle emissions, while temperature and vehicle load most affect fine particle release.
On-Road Vehicle Measurement of Tire Wear Particle Emissions and Approach for Emission Prediction
AI summary Read the abstract
An instrumented measurement vehicle was developed to quantify tire wear particle emissions under real-world on-road conditions, identifying key driving parameters such as speed, load, and cornering that govern emission rates. The study supports the development of emission factors and regulatory standards for non-exhaust tire-derived microplastic pollution.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.