Sustainable Development and Assessment of Low-Strength/High-Toughness Recycled Plastic Rebars for Structural Elements Under Light Loads

The construction sector faces growing pressure to adopt sustainable alternatives amid the global plastic-waste crisis. This study presents a novel use of mechanically recycled high-density polyethylene (HDPE) and polypropylene (PP) to manufacture full-scale plastic rebars for mortar-free, light-load construction applications. A total of 48 samples, plain and ribbed, across three diameters (12 mm, 19 mm, and 25 mm) were fabricated and tested. Due to the absence of standardized protocols for recycled plastic rebars, tensile testing was conducted in reference to ASTM A615. Characterization techniques such as X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM) confirmed the material’s structural features and polymer integrity. XRD confirmed the crystalline phases of HDPE and PP, while SEM revealed ductile fracture in HDPE and brittle failure in PP. The 25 mm ribbed PP rebars demonstrated superior performance, achieving a maximum load capacity of 12.2 ± 0.6 kN, a toughness index of 19.3 ± 1.0, and energy absorption of 101.6 ± 5.0 N-m × 10. These results affirm their suitability for lightweight structural components such as boundary walls, partition panels, and mortar-free interlocking systems. Unlike prior studies that confined recycled plastics to filler roles in composites, this work validates their direct application as full-section, load-bearing members. Additionally, a polynomial-based empirical model was formulated to predict the tensile behavior of the recycled rebars. The findings underscore the potential of mechanical extrusion as a low-emission, scalable solution to convert plastic waste into durable construction materials that support circular economic principles.