0
Article Tier 2 Detection Methods Environmental Sources Marine & Wildlife Sign in to save

Identifikasi Mikroplastik Jenis Polystyrene (PS) Menggunakan Metode Wet Peroxide Oxidation (WPO)

AI summary Read the abstract

Researchers optimized the wet peroxide oxidation (WPO) method to extract and identify polystyrene microplastics from aquatic samples, testing variations in Fe(II) concentration and heating temperature. The study determined optimal WPO conditions for effective removal of organic matter while preserving microplastic integrity for downstream spectroscopic identification.

Polymers

Polystyrene (PS) microplastics from styrofoam waste are persistent contaminants that are difficult to degrade naturally in aquatic environments and require effective extraction methods for analysis and mitigation. This study aims to determine the optimal conditions of Fe(II) concentration and heating temperature in the Wet Peroxide Oxidation (WPO) method for extracting PS microplastics, as well as to identify their functional groups and elemental composition. The method involved treating polluted water samples using WPO solution consisting of Fe(II) as a catalyst and 30% H₂O₂ as an oxidizing agent, with Fe(II) concentrations of 0.075 M, 0.1 M, and 0.125 M, and heating temperatures of 60°C, 75°C, and 90°C. Microplastic identification was conducted using FTIR and XRF instruments. The results showed that the optimal Fe(II) concentration was 0.125 M, yielding 1.27 grams of microplastics, while the optimal temperature was 60°C, yielding 2.58 grams of microplastics. FTIR characterization confirmed the presence of characteristic PS functional groups, including C-H bending of the benzene ring at 753.22 cm⁻¹ and aliphatic C-H stretching at 2919.27 cm⁻¹, which were also detected in samples from enclosed environments. XRF analysis under optimal conditions indicated that the elemental composition of the extracted microplastics was not entirely pure due to residual contaminants. These findings confirm the effectiveness of the WPO method for extracting PS microplastics under optimized operational conditions.

More Papers Like This

Article Tier 2

Identifikasi Mikroplastik Polyethylene (PE) Menggunakan Digesting Wet Peroxide Oxidation (WPO)

AI summary Read the abstract

This Indonesian study tested a wet peroxide oxidation method for extracting and identifying polyethylene microplastics from environmental samples. Standardizing effective extraction methods is essential for accurate measurement and monitoring of microplastic contamination in water and sediment.

Article Tier 2

Optimasi Konsentrasi Fe(II) pada Metode Wet Peroxide Oxidation (WPO) untuk Identifikasi Mikroplastik Polypropylene (PP)

AI summary Read the abstract

Researchers optimized the concentration of Fe(II) catalyst in the Wet Peroxide Oxidation (WPO) method for identifying polypropylene microplastics, testing five catalyst concentrations (0.025-0.125 M) adapted from NOAA protocols to improve removal of organic impurities that complicate microplastic analysis.

Article Tier 2

Identifikasi Mikroplastik Poliamida (PA) dengan Menggunakan Metode Ekstraksi Penambahan Wet Peroxide Oxidation (WPO)

AI summary Read the abstract

This study developed an extraction method using hydrogen peroxide to identify polyamide (PA) microplastics from environmental samples, optimizing oven time and peroxide concentration. Polyamide (nylon) is a common source of microplastic fibers from textile washing, and better extraction methods improve the ability to detect and quantify this polymer type.

Article Tier 2

Identification of polystyrene nanoplastics from natural organic matter in complex environmental matrices by pyrolysis–gas chromatography–mass spectrometry

AI summary Read the abstract

Researchers used pyrolysis-gas chromatography-mass spectrometry to identify polystyrene nanoplastics in environmental samples containing natural organic matter, developing methods to distinguish nanoplastic signals from complex organic background matrices in water.

Article Tier 2

Characterization and identification of microplastics in freshwater systems

AI summary Read the abstract

Researchers tested methods to identify tiny plastic particles (called microplastics) collected from freshwater samples, using techniques that measure melting behavior, density, and weight loss when heated. The methods successfully identified common plastics like polyethylene and polystyrene, and grouped samples by similar physical and chemical properties.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper