0
Article Tier 2 Sign in to save

Influence of plastic co-feeding on oxygen utilization pathways in high-temperature coal gasification

AI summary Read the abstract

Researchers co-gasified bituminous coal with up to 30% HDPE in a laminar entrained-flow reactor at 1300–1400°C, finding that plastic addition had minimal effect on coal carbon conversion but increased the CO/CO₂ ratio by up to 45% because volatile combustion consumed available oxygen before char reactions, improving syngas quality while valorizing plastic waste.

Polymers

Coal gasification is a mature technology for producing synthesis gas (syngas), while managing end-of-life plastics remains a growing environmental challenge. Co-gasification of coal and plastics offers a promising approach to both valorize plastic waste and expand feedstock flexibility in existing systems. However, interactions between plastic-derived volatiles and coal, particularly regarding oxygen competition and syngas composition, are not well understood. This study investigates coal/HDPE co-gasification using a laminar entrained-flow reactor at 1300–1400°C. Pulverized bituminous coal was blended with high-density polyethylene (HDPE) at 5–30% mass fractions and gasified with oxygen at a stoichiometric ratio of 0.5. Effects of temperature, particle size, plastic loading, and residence time were evaluated. Coal carbon conversion ranged from 65% to 78%, increasing with higher temperature, smaller particles, and longer residence time. Adding HDPE resulted in only modest gains in coal conversion (1–3 percentage points) but significantly increased the CO/CO 2 ratio by up to 45% at higher temperatures and rose consistently with plastic content. Results indicate that most oxygen is consumed by volatile combustion, limiting availability for char reactions. Because HDPE volatilizes at low temperatures, it intensifies oxygen competition but does not significantly reduce coal conversion. Instead, partial oxidation of plastic volatiles under oxygen-limited conditions favors CO production, improving syngas quality. These findings demonstrate that coal–plastic co-gasification can enhance syngas composition while providing a viable pathway for plastic waste utilization. • Addition of plastic to coal gasification creates competition for O 2 • Higher temperatures, smaller particle sizes and longer residence times improved conversion • Addition of up to 30% plastic had minimal influence on coal carbon conversion • Co-gasifying plastic with coal increases the CO/CO 2 ratio of the product gas

More Papers Like This

Article Tier 2

Plastic regulates its co-pyrolysis process with biomass: Influencing factors, model calculations, and mechanisms

AI summary Read the abstract

Researchers investigated co-pyrolysis of plastics and biomass, finding that varying the hydrogen-to-carbon ratio of biomass feedstocks influences synergistic effects on bio-oil quality, offering a strategy to improve plastic waste valorization.

Article Tier 2

Co-Pyrolysis of Plastic Waste and Lignin: A Pathway for Enhanced Hydrocarbon Recovery

AI summary Read the abstract

Researchers investigated co-pyrolysis of plastic waste (polypropylene, polyethylene) with lignin biomass at various ratios and temperatures to recover valuable hydrocarbons. They found that mixing plastics with lignin enhanced the recovery of higher-value chemical products, with the best results at 600 degrees Celsius using polyethylene-lignin mixtures. The study demonstrates a pathway for converting both plastic and biomass waste into useful chemical feedstocks, potentially reducing plastic pollution.

Article

Review of Gasification of Thermoplastics and Thermosets

AI summary Read the abstract

Researchers reviewed gasification as a thermal treatment pathway for end-of-life thermoplastics and thermosets, assessing how different polymer types respond to high-temperature gasification and evaluating its potential as a scalable alternative to landfilling for plastics that cannot be mechanically recycled.

Article Tier 2

Co-gasification of Waste Biomass and Plastic for Syngas Production with CO2 Capture and Utilization: Thermodynamic Investigation

AI summary Read the abstract

Researchers performed a thermodynamic investigation of an integrated plant-wide process for co-gasifying waste biomass and plastics using steam and CO2, designing the system to produce syngas at an H2/CO molar ratio of approximately 2 while incorporating carbon capture and utilization.

Article

Chemical Looping Gasification of Plastics toward Hydrogen-Rich Syngas: A Review of Oxygen Carrier Design and Process Optimization

AI summary Read the abstract

A systematic review of chemical looping gasification technology found that optimized oxygen carrier design using bimetallic synergy and staged reactors can convert plastic waste into hydrogen-rich syngas with flexible H2/CO ratios, though studies using actual mixed plastic waste remain scarce. This directly advances microplastic pollution research by providing a thermochemical pathway to valorize end-of-life plastics before they fragment into environmental microplastics.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper