0
Article Sign in to save

Life cycle analysis of polylactic acids from different wet waste feedstocks

Cancer Plus 2022 25 citations

AI summary Read the abstract

Researchers conducted life-cycle analysis of polylactic acid (PLA) produced from three waste streams — wastewater sludge, food waste, and swine manure — finding all three pathways emit significantly less greenhouse gas than fossil-based PET or HDPE, with swine manure yielding the lowest carbon intensity at −1.4 kg CO₂e per kilogram.

Polymers
Study Type Environmental

Producing a valuable chemical product through diversion of wet wastes can simultaneously resolve the problems associated with increasing wastes and greenhouse gas emissions from conventional chemical production processes. In this work, we investigated the life-cycle greenhouse gas emissions, water, and fossil-fuel consumption for waste-derived polylactic acids (PLA) from three different waste feedstocks, namely wastewater sludge, food waste, and swine manure, using the Greenhouse Gases, Regulated Emissions, and Energy Use in Technologies (GREET) model. The decarbonization potential of replacing fossil-based resins with the waste-derived polymer was also investigated. The results show that swine manure-to-PLA pathway was the least carbon intensive (−1.4 kgCO2e/kg) among the three waste-to-PLA pathways on a cradle-to-grave basis, followed by the food waste case (−1.3 kgCO2e/kg) and then by the wastewater sludge case (0.6 kgCO2e/kg). In the baseline scenario, all three waste-to-PLA pathways were less carbon intensive than both fossil-based PET and HDPE on a cradle-to-grave basis: 66% (vs. PET) and 56% (vs. HDPE), 171 and 192%, 181 and 205% reduction in GHG emissions for wastewater sludge-, food waste-, and swine manure-to-PLA pathway, respectively. For all sensitivity cases investigated, the food waste- and swine manure-to-PLA pathways were significantly less carbon intensive than their fossil-counterparts. In terms of the annual decarbonization potential of replacing fossil-based PET or HDPE, the wastewater sludge- and food waste-pathway showed higher mitigation potential than the swine manure-pathway: i) 18–28 kilotons CO2e-reduction per year for wastewater sludge pathway; ii) 23–26 kTCO2e-reduction/yr for food waste pathway; and iii) about 5 kTCO2e-reduction/yr for swine manure pathway depending on the type of conventional resin replaced. However, given the abundant availability of the swine manure feedstocks across the United States, the decarbonization potential of swine manure-based pathway can also increase as the plant capacity or the number of plants grow.

More Papers Like This

Article

Valorisation of polylactic acid (PLA) waste: A comparative life cycle assessment of various solvent-based chemical recycling technologies

AI summary Read the abstract

"Researchers performed a life cycle assessment comparing three chemical recycling routes — hydrolysis, methanol-based alcoholysis, and ethanol-based alcoholysis — for post-consumer PLA plastic waste, finding all three outperform direct incineration across most environmental impact categories. Alcoholysis methods showed the greatest benefits for global warming and acidification, while hydrolysis was superior for reducing land use and water scarcity."

Article Tier 2

Attributional and consequential life cycle perspectives of second-generation polylactic acid: The benefits of integrating a recycling strategy

AI summary Read the abstract

Researchers used life cycle assessment to evaluate the environmental feasibility of second-generation polylactic acid (PLA) production from wheat straw, comparing attributional and consequential perspectives and assessing the role of chemical recycling on environmental performance. The study found that integrating a recycling strategy improved the environmental profile of the bio-based bioplastic.

Article

Life Cycle Assessment of Polylactic Acid Biopolymer Industrial Waste Management Techniques in Belize

AI summary Read the abstract

This study used life cycle assessment to compare four waste management methods for polylactic acid (PLA) bioplastic waste in Belize, finding that anaerobic digestion produced the greatest climate benefit (-0.06 kg CO2 eq. per kg PLA) by generating energy offsets, outperforming landfill, landfill expansion, and cogeneration.

Article

Life Cycle Assessment (LCA) of Bioplastics

AI summary Read the abstract

Researchers conducted life cycle assessments of multiple bioplastic types — including PLA, PHA, and starch-based polymers — finding that while bioplastics generally reduce fossil resource depletion compared to conventional plastics, their environmental benefits vary considerably depending on feedstock, production process, and end-of-life scenario.

Review

Eco-based polymers: A review concerning bioplastics with greater manufacturing potential

AI summary Read the abstract

This review examines the development and production of bioplastics derived from renewable biological sources, focusing on sustainable and green chemistry approaches that minimize environmental impact. It covers feedstocks, synthesis methods, material properties, and the potential of eco-based polymers to serve as viable alternatives to conventional petroleum-derived plastics.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper