0
Article Sign in to save

Determination of trace potassium permanganate in tap water by solid phase extraction combined with spectrophotometry

World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany 2023 10 citations

AI summary Read the abstract

Researchers developed a solid-phase extraction method coupled with spectrophotometry to detect trace levels of potassium permanganate in tap water, using polyamide-6 sorbent to concentrate permanganate and TMB as both eluent and colorimetric reagent. The method achieved a detection limit of 5.1 nM with a linear range of 0.01-1 micromol/L, providing a simple and sensitive tool for water quality monitoring.

Polymers
Study Type Environmental

A simple solid phase extraction (SPE) coupled with spectrophotometric method was developed for determination of trace permanganate (MnO4 -) in water. Commercial reagent polyamined-6 powder was used as SPE stationary phase to retain MnO4 - which is based on the fact that MnO4 - can be adsorbed on polyamide 6 (PA-6) sorbent as water samples flow through the SPE cartridge. 3,3',5,5'-tetramethylbenzidine (TMB) were used both as eluent solution and chromogenic agent to convert the adsorbed MnO4 - into Mn2+ and generate blue oxidized product with high molar absorptivity. Quantification of MnO4 - could be obtained by spectrophotometric detection of the resulting solution flow out of the SPE cartridge. The extraction and detection variables was optimized to maximize the absorbance of the TMB oxidized product. Under optimized conditions, this method provided linear dynamic ranges of 0.01-1 μmol L-1 for MnO4 - with preconcentration of 100 mL water sample. The limits of detection (3Sb/m) of this method in deionized water were calculated to be 5.1 nM, and the relative standard deviations were determined to be 3.2% (C = 0.1 μmol L-1, n = 5). This method has been applied to the determination of MnO4 - in spiked tap waters and satisfactory recovery was obtained.

More Papers Like This

Article Tier 2

Magic extraction: solid-phase extraction and analytical pyrolysis to study polycyclic aromatic hydrocarbon and polychlorinated biphenyls in freshwater

AI summary Read the abstract

A new solventless solid-phase extraction method was tested for extracting polycyclic aromatic hydrocarbons and polychlorinated biphenyls from freshwater samples. The Magic Chemisorber material selectively captured these persistent organic pollutants without the need for large volumes of organic solvents. This cleaner analytical technique reduces hazardous waste while maintaining good recovery of target contaminants.

Article Tier 2

Adsorption–desorption behavior of malachite green by potassium permanganate pre-oxidation polyvinyl chloride microplastics

AI summary Read the abstract

PVC microplastics treated with potassium permanganate oxidation gained MnO2 nanoparticles on their surface, increasing malachite green dye adsorption capacity from 2.6 mg/g to 140.7 mg/g under composite oxidation conditions, though high total desorption capacity indicates significant risk of dye release in gastrointestinal fluids.

Article Tier 2

Activated Persulfate Oxidation as Pretreatment for Quantification of Microplastics in Natural Water

AI summary Read the abstract

Researchers developed a rapid pretreatment method using heat- and base-activated persulfate oxidation to improve the accuracy of microplastic counting in natural water samples. The technique effectively removed organic matter that interferes with detection while preserving the integrity of most common plastic types. The study offers a simpler and faster alternative to existing sample preparation methods for microplastic quantification.

Article Tier 2

Surface characteristic and sinking behavior modifications of microplastics during potassium permanganate pre-oxidation

AI summary Read the abstract

Researchers found that potassium permanganate pre-oxidation treatment modifies the surface characteristics of microplastics in drinking water, altering their sinking behavior and affecting how they are processed during water treatment.

Article Tier 2

Microplastic analysis in drinking water based on fractionated filtration sampling and Raman microspectroscopy

AI summary Read the abstract

A validated analytical workflow for detecting microplastics down to 5 µm in drinking water was developed using a portable filter cascade unit followed by two-step semi-automated Raman microspectroscopy, and was applied successfully to processed drinking water, tap water, and groundwater.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper